see, as i drag things from my browser and other folders to my desktop, i'm lazy and leave them there, often creating small scripts and whatnot aswell, so my desktop ends up getting cluttered up with a million files - some of which may be important
my solution
https://pastebin.com/igLghF3Y
Code: Select all
;Made by Bugz000, set DIR to a directory you wish any non-icons to be moved to
;then run the program for instant clear desktop :)
Dir := "K:\Stuff"
#singleinstance, force
setworkingdir %A_Desktop%
CircleProgress := new CircleProgressClass({y: 500, TextStyle: "Bold", BarThickness: 10, BarDiameter: 140})
CircleProgress.Update(0, setting environment)
WinGet, _id, ID, A
IfNOTExist, %Dir%
FileCreateDir, %Dir%
if (ErrorLevel)
loop 3
if (A_index = 1)
loop 255
CircleProgress.Update(100, "Target Dir is not valid :(")
else if (A_index = 2)
loop 255
CircleProgress.Update(100, "Target Dir is not valid :(", (255 - A_index))
else if (A_index = 3)
exitapp
Loop, Files, *, R
if (A_LoopFileExt != "lnk")
if (A_LoopFileExt != "url")
{
Count+=1
File%Count% := A_LoopFileFullPath
FileGetSize, FileSize, %A_LoopFileFullPath%, K
File%Count%size := Filesize
CircleProgress.Update(0, "Gathering Information`r`n" Count)
}
Loop, %count%
{
CircleProgress.Update(0, "Checking destinations`r`n" A_Index)
S := File%A_Index%
IfNOTExist, %Dir%\%S%
File%A_Index%Des = %Dir%\%S%
else
{
t := A_Index
i = 1
loop
IfNOTExist, %Dir%\%i% %S%
{
File%t%Des = %Dir%\%i% %S%
break
}
else
i++
}
}
loop %count%
{
if !(InStr(FileExist(SubStr(File%A_Index%Des, 1, InStr(SubStr(File%A_Index%Des,1,-1), "\", 0, 0)-1)), "D"))
{
CircleProgress.Update(((A_index * 100) / Count), "Creating required`r`ndirectories" )
FileCreateDir, % SubStr(File%A_Index%Des, 1, InStr(SubStr(File%A_Index%Des,1,-1), "\", 0, 0)-1)
}
}
loop %count%
Move(a_index, file%A_index%, File%A_Index%Des)
loop %count%
{
CircleProgress.Update(((A_index * 100) / Count), "Cleaning up`r`nold directories" )
if (InStr(FileExist(SubStr(File%A_Index%, 1, InStr(SubStr(File%A_Index%,1,-1), "\", 0, 0)-1)), "D"))
FileRemoveDir % SubStr(File%A_Index%, 1, InStr(SubStr(File%A_Index%,1,-1), "\", 0, 0)-1), 1
}
CircleProgress.Update(100, "Clearing Pre-existing empty folders...")
Loop, *, 2, 1
FileRemoveDir, %A_LoopFileLongPath%, 1
if (Count)
loop 255
CircleProgress.Update(100, Count "`r`n" Filesize " kb`r`n" T " kb", (255 - A_index))
else
loop 3
if (A_index = 1)
loop 255
CircleProgress.Update(100, "No Files to move :)")
else if (A_index = 2)
loop 255
CircleProgress.Update(100, "No Files to move :)", (255 - A_index))
else if (A_index = 3)
exitapp
sleep 100
ControlSend,, {F5}, ahk_class Progman
exitapp
Move(index, Src, Des)
{
global
Filesize := File%index%Size
t += filesize
CircleProgress.Update(((index * 100) / Count), index "`r`n" FileSize "kb`r`n" T "kb" )
a := index
rar := ((count / 100) * index), index "`r`n" FileSize "`r`n" T
FileMove, %src%, %des%
}
class CircleProgressClass { ; http://ahkscript.org/boards/viewtopic.php?p=41794#p41794
; Credits: Bruttosozialprodukt, Learning one. This code is public domain.
static Version := 1.04
__New(Options="") {
this.BarDiameter := (Options.HasKey("BarDiameter") = 1) ? Options.BarDiameter : 110
this.BarThickness := (Options.HasKey("BarThickness") = 1) ? Options.BarThickness : 16
this.BarColor := (Options.HasKey("BarColor") = 1) ? Options.BarColor : "dd228822"
this.BackgroundColor := (Options.HasKey("BackgroundColor") = 1) ? Options.BackgroundColor : "ffffffff"
this.TextColor := (Options.HasKey("TextColor") = 1) ? Options.TextColor : "ee000000"
this.TextSize := (Options.HasKey("TextSize") = 1) ? Options.TextSize : 11
this.TextRendering := (Options.HasKey("TextRendering") = 1) ? Options.TextRendering : 5
this.TextFont := (Options.HasKey("TextFont") = 1) ? Options.TextFont : "Arial"
this.TextStyle := (Options.HasKey("TextStyle") = 1) ? Options.TextStyle : "" ; you can use for example "Bold Italic"
this.X := (Options.HasKey("X") = 1) ? Options.X : Round(A_ScreenWidth/2-this.BarDiameter/2-this.BarThickness) ; centered is defualt
this.Y := (Options.HasKey("Y") = 1) ? Options.Y : Round(A_ScreenHeight/2-this.BarDiameter/2-this.BarThickness) ; centered is defualt
this.W := this.BarDiameter+this.BarThickness*2+2 ; it's good to add 2 extra pixels
this.UseClickThrough := (Options.HasKey("UseClickThrough") = 1) ? Options.UseClickThrough : 1 ; 1 = use it, 0 = don't use it
Gui, New, +Hwndhwnd
Gui %hwnd%: -Caption +E0x80000 +LastFound +AlwaysOnTop +ToolWindow +OwnDialogs
Gui %hwnd%: Show, NA
if (this.UseClickThrough = 1)
WinSet, ExStyle, +0x20, % "ahk_id " hwnd ; click through style
hbm := CreateDIBSection(this.W, this.W), hdc := CreateCompatibleDC(), obm := SelectObject(hdc, hbm)
pPen:=Gdip_CreatePen("0x" this.BarColor, this.BarThickness)
if (pPen = 0) { ; GDI+ is not started up - start it up now and shut it down in __Delete() automatically.
pToken := Gdip_Startup()
pPen:=Gdip_CreatePen("0x" this.BarColor, this.BarThickness) ; call it again (with GDI+ started up now)
}
G := Gdip_GraphicsFromHDC(hdc), Gdip_SetSmoothingMode(G, 4)
if (this.BackgroundColor > 0)
pBrush:=Gdip_BrushCreateSolid("0x" this.BackgroundColor)
this.hwnd := hwnd, this.hdc := hdc, this.obm := obm, this.hbm := hbm, this.pPen := pPen, this.pBrush := pBrush, this.G := G, this.pToken := pToken
}
Update(Percent=0, Text="", Alpha=255) {
Gdip_GraphicsClear(this.G)
if (this.BackgroundColor > 0)
Gdip_FillEllipse(this.G, this.pBrush, this.BarThickness+1, this.BarThickness+1, this.BarDiameter,this.BarDiameter)
if (Percent>0)
Gdip_DrawArc(this.G, this.pPen, Round(this.BarThickness/2)+1, Round(this.BarThickness/2)+1, this.BarDiameter+this.BarThickness, this.BarDiameter+this.BarThickness, 270, Round(360/100*percent))
if (Text!="") {
Options := Trim("x1 y1 w" this.W-2 " h" this.W-2 " Center Vcenter r" this.TextRendering " s" this.TextSize " c" this.TextColor A_Space this.TextStyle)
Gdip_TextToGraphics(this.G, Text, Options, this.TextFont)
}
;pControlPen:=Gdip_CreatePen("0xffff0000", 1), Gdip_DrawRectangle(this.G, pControlPen, 1, 1, this.W-2,this.W-2), Gdip_DeletePen(pControlPen)
UpdateLayeredWindow(this.hwnd, this.hdc, this.X, this.Y, this.W, this.W, Alpha)
}
Clear() { ; Just clears the graphics and updates layered window. Doesn't destroy object nor clear resources.
Gdip_GraphicsClear(this.G)
UpdateLayeredWindow(this.hwnd, this.hdc, this.X, this.Y, this.W, this.W)
}
__Delete() {
Gdip_DeletePen(this.pPen)
if (this.BackgroundColor > 0)
Gdip_DeleteBrush(this.pBrush)
Gdip_DeleteGraphics(this.G)
SelectObject(this.hdc, this.obm)
DeleteObject(this.hbm)
DeleteDC(this.hdc)
if (this.pToken != "") ; GDI+ was obviously automatically started up in __New(), and therefore shut it down automatically now
Gdip_Shutdown(this.pToken)
hwnd := this.hwnd
Gui %hwnd%: Destroy
}
FadeOut(end = 0, speed = 10) {
Window := "ahk_id " this.hwnd
WinGet, currentTrans, Transparent, %window% ; Set varialbe "currentTrans" to whatever the desired windows transparacy is
If (currentTrans == "") ; Check if the window is in "Off" mode
{
WinSet, Trans, 255, %window% ; Sets the window to max transpacity so that it may be changed
WinGet, currentTrans, Transparent, %window% ; Reset varialbe "currentTrans"
}
While, (currentTrans > end)
{
Sleep, % speed / 2 ; This is just for a more smooth effect, can be buggy
Trans := currentTrans - speed ; Sets the transpacity, I'm pretty sure this is where I messed up
WinSet, Trans, %Trans%, %window%
WinGet, currentTrans, Transparent, %window% ; Resets the variable "currentTrans" to what the windows new transpacity is so the While loop knows when to end
}
}
}
;GDIP Lib
; Gdip standard library v1.45 by tic (Tariq Porter) 07/09/11
;
;#####################################################################################
;#####################################################################################
; STATUS ENUMERATION
; Return values for functions specified to have status enumerated return type
;#####################################################################################
;
; Ok = = 0
; GenericError = 1
; InvalidParameter = 2
; OutOfMemory = 3
; ObjectBusy = 4
; InsufficientBuffer = 5
; NotImplemented = 6
; Win32Error = 7
; WrongState = 8
; Aborted = 9
; FileNotFound = 10
; ValueOverflow = 11
; AccessDenied = 12
; UnknownImageFormat = 13
; FontFamilyNotFound = 14
; FontStyleNotFound = 15
; NotTrueTypeFont = 16
; UnsupportedGdiplusVersion = 17
; GdiplusNotInitialized = 18
; PropertyNotFound = 19
; PropertyNotSupported = 20
; ProfileNotFound = 21
;
;#####################################################################################
;#####################################################################################
; FUNCTIONS
;#####################################################################################
;
; UpdateLayeredWindow(hwnd, hdc, x="", y="", w="", h="", Alpha=255)
; BitBlt(ddc, dx, dy, dw, dh, sdc, sx, sy, Raster="")
; StretchBlt(dDC, dx, dy, dw, dh, sDC, sx, sy, sw, sh, Raster="")
; SetImage(hwnd, hBitmap)
; Gdip_BitmapFromScreen(Screen=0, Raster="")
; CreateRectF(ByRef RectF, x, y, w, h)
; CreateSizeF(ByRef SizeF, w, h)
; CreateDIBSection
;
;#####################################################################################
; Function: UpdateLayeredWindow
; Description: Updates a layered window with the handle to the DC of a gdi bitmap
;
; hwnd Handle of the layered window to update
; hdc Handle to the DC of the GDI bitmap to update the window with
; Layeredx x position to place the window
; Layeredy y position to place the window
; Layeredw Width of the window
; Layeredh Height of the window
; Alpha Default = 255 : The transparency (0-255) to set the window transparency
;
; return If the function succeeds, the return value is nonzero
;
; notes If x or y omitted, then layered window will use its current coordinates
; If w or h omitted then current width and height will be used
UpdateLayeredWindow(hwnd, hdc, x="", y="", w="", h="", Alpha=255)
{
if ((x != "") && (y != ""))
VarSetCapacity(pt, 8), NumPut(x, pt, 0), NumPut(y, pt, 4)
if (w = "") ||(h = "")
WinGetPos,,, w, h, ahk_id %hwnd%
return DllCall("UpdateLayeredWindow", "uint", hwnd, "uint", 0, "uint", ((x = "") && (y = "")) ? 0 : &pt
, "int64*", w|h<<32, "uint", hdc, "int64*", 0, "uint", 0, "uint*", Alpha<<16|1<<24, "uint", 2)
}
;#####################################################################################
; Function BitBlt
; Description The BitBlt function performs a bit-block transfer of the color data corresponding to a rectangle
; of pixels from the specified source device context into a destination device context.
;
; dDC handle to destination DC
; dx x-coord of destination upper-left corner
; dy y-coord of destination upper-left corner
; dw width of the area to copy
; dh height of the area to copy
; sDC handle to source DC
; sx x-coordinate of source upper-left corner
; sy y-coordinate of source upper-left corner
; Raster raster operation code
;
; return If the function succeeds, the return value is nonzero
;
; notes If no raster operation is specified, then SRCCOPY is used, which copies the source directly to the destination rectangle
;
; BLACKNESS = 0x00000042
; NOTSRCERASE = 0x001100A6
; NOTSRCCOPY = 0x00330008
; SRCERASE = 0x00440328
; DSTINVERT = 0x00550009
; PATINVERT = 0x005A0049
; SRCINVERT = 0x00660046
; SRCAND = 0x008800C6
; MERGEPAINT = 0x00BB0226
; MERGECOPY = 0x00C000CA
; SRCCOPY = 0x00CC0020
; SRCPAINT = 0x00EE0086
; PATCOPY = 0x00F00021
; PATPAINT = 0x00FB0A09
; WHITENESS = 0x00FF0062
; CAPTUREBLT = 0x40000000
; NOMIRRORBITMAP = 0x80000000
BitBlt(ddc, dx, dy, dw, dh, sdc, sx, sy, Raster="")
{
return DllCall("gdi32\BitBlt", "uint", dDC, "int", dx, "int", dy, "int", dw, "int", dh
, "uint", sDC, "int", sx, "int", sy, "uint", Raster ? Raster : 0x00CC0020)
}
;#####################################################################################
; Function StretchBlt
; Description The StretchBlt function copies a bitmap from a source rectangle into a destination rectangle,
; stretching or compressing the bitmap to fit the dimensions of the destination rectangle, if necessary.
; The system stretches or compresses the bitmap according to the stretching mode currently set in the destination device context.
;
; ddc handle to destination DC
; dx x-coord of destination upper-left corner
; dy y-coord of destination upper-left corner
; dw width of destination rectangle
; dh height of destination rectangle
; sdc handle to source DC
; sx x-coordinate of source upper-left corner
; sy y-coordinate of source upper-left corner
; sw width of source rectangle
; sh height of source rectangle
; Raster raster operation code
;
; return If the function succeeds, the return value is nonzero
;
; notes If no raster operation is specified, then SRCCOPY is used. It uses the same raster operations as BitBlt
StretchBlt(ddc, dx, dy, dw, dh, sdc, sx, sy, sw, sh, Raster="")
{
return DllCall("gdi32\StretchBlt", "uint", ddc, "int", dx, "int", dy, "int", dw, "int", dh
, "uint", sdc, "int", sx, "int", sy, "int", sw, "int", sh, "uint", Raster ? Raster : 0x00CC0020)
}
;#####################################################################################
; Function SetStretchBltMode
; Description The SetStretchBltMode function sets the bitmap stretching mode in the specified device context
;
; hdc handle to the DC
; iStretchMode The stretching mode, describing how the target will be stretched
;
; return If the function succeeds, the return value is the previous stretching mode. If it fails it will return 0
;
; STRETCH_ANDSCANS = 0x01
; STRETCH_ORSCANS = 0x02
; STRETCH_DELETESCANS = 0x03
; STRETCH_HALFTONE = 0x04
SetStretchBltMode(hdc, iStretchMode=4)
{
return DllCall("gdi32\SetStretchBltMode", "uint", hdc, "int", iStretchMode)
}
;#####################################################################################
; Function SetImage
; Description Associates a new image with a static control
;
; hwnd handle of the control to update
; hBitmap a gdi bitmap to associate the static control with
;
; return If the function succeeds, the return value is nonzero
SetImage(hwnd, hBitmap)
{
SendMessage, 0x172, 0x0, hBitmap,, ahk_id %hwnd%
E := ErrorLevel
DeleteObject(E)
return E
}
;#####################################################################################
; Function SetSysColorToControl
; Description Sets a solid colour to a control
;
; hwnd handle of the control to update
; SysColor A system colour to set to the control
;
; return If the function succeeds, the return value is zero
;
; notes A control must have the 0xE style set to it so it is recognised as a bitmap
; By default SysColor=15 is used which is COLOR_3DFACE. This is the standard background for a control
;
; COLOR_3DDKSHADOW = 21
; COLOR_3DFACE = 15
; COLOR_3DHIGHLIGHT = 20
; COLOR_3DHILIGHT = 20
; COLOR_3DLIGHT = 22
; COLOR_3DSHADOW = 16
; COLOR_ACTIVEBORDER = 10
; COLOR_ACTIVECAPTION = 2
; COLOR_APPWORKSPACE = 12
; COLOR_BACKGROUND = 1
; COLOR_BTNFACE = 15
; COLOR_BTNHIGHLIGHT = 20
; COLOR_BTNHILIGHT = 20
; COLOR_BTNSHADOW = 16
; COLOR_BTNTEXT = 18
; COLOR_CAPTIONTEXT = 9
; COLOR_DESKTOP = 1
; COLOR_GRADIENTACTIVECAPTION = 27
; COLOR_GRADIENTINACTIVECAPTION = 28
; COLOR_GRAYTEXT = 17
; COLOR_HIGHLIGHT = 13
; COLOR_HIGHLIGHTTEXT = 14
; COLOR_HOTLIGHT = 26
; COLOR_INACTIVEBORDER = 11
; COLOR_INACTIVECAPTION = 3
; COLOR_INACTIVECAPTIONTEXT = 19
; COLOR_INFOBK = 24
; COLOR_INFOTEXT = 23
; COLOR_MENU = 4
; COLOR_MENUHILIGHT = 29
; COLOR_MENUBAR = 30
; COLOR_MENUTEXT = 7
; COLOR_SCROLLBAR = 0
; COLOR_WINDOW = 5
; COLOR_WINDOWFRAME = 6
; COLOR_WINDOWTEXT = 8
SetSysColorToControl(hwnd, SysColor=15)
{
WinGetPos,,, w, h, ahk_id %hwnd%
bc := DllCall("GetSysColor", "Int", SysColor)
pBrushClear := Gdip_BrushCreateSolid(0xff000000 | (bc >> 16 | bc & 0xff00 | (bc & 0xff) << 16))
pBitmap := Gdip_CreateBitmap(w, h), G := Gdip_GraphicsFromImage(pBitmap)
Gdip_FillRectangle(G, pBrushClear, 0, 0, w, h)
hBitmap := Gdip_CreateHBITMAPFromBitmap(pBitmap)
SetImage(hwnd, hBitmap)
Gdip_DeleteBrush(pBrushClear)
Gdip_DeleteGraphics(G), Gdip_DisposeImage(pBitmap), DeleteObject(hBitmap)
return 0
}
;#####################################################################################
; Function Gdip_BitmapFromScreen
; Description Gets a gdi+ bitmap from the screen
;
; Screen 0 = All screens
; Any numerical value = Just that screen
; x|y|w|h = Take specific coordinates with a width and height
; Raster raster operation code
;
; return If the function succeeds, the return value is a pointer to a gdi+ bitmap
; -1: one or more of x,y,w,h not passed properly
;
; notes If no raster operation is specified, then SRCCOPY is used to the returned bitmap
Gdip_BitmapFromScreen(Screen=0, Raster="")
{
if (Screen = 0)
{
Sysget, x, 76
Sysget, y, 77
Sysget, w, 78
Sysget, h, 79
}
else if (SubStr(Screen, 1, 5) = "hwnd:")
{
Screen := SubStr(Screen, 6)
if !WinExist( "ahk_id " Screen)
return -2
WinGetPos,,, w, h, ahk_id %Screen%
x := y := 0
hhdc := GetDCEx(Screen, 3)
}
else if (Screen&1 != "")
{
Sysget, M, Monitor, %Screen%
x := MLeft, y := MTop, w := MRight-MLeft, h := MBottom-MTop
}
else
{
StringSplit, S, Screen, |
x := S1, y := S2, w := S3, h := S4
}
if (x = "") || (y = "") || (w = "") || (h = "")
return -1
chdc := CreateCompatibleDC(), hbm := CreateDIBSection(w, h, chdc), obm := SelectObject(chdc, hbm), hhdc := hhdc ? hhdc : GetDC()
BitBlt(chdc, 0, 0, w, h, hhdc, x, y, Raster)
ReleaseDC(hhdc)
pBitmap := Gdip_CreateBitmapFromHBITMAP(hbm)
SelectObject(chdc, obm), DeleteObject(hbm), DeleteDC(hhdc), DeleteDC(chdc)
return pBitmap
}
;#####################################################################################
; Function Gdip_BitmapFromHWND
; Description Uses PrintWindow to get a handle to the specified window and return a bitmap from it
;
; hwnd handle to the window to get a bitmap from
;
; return If the function succeeds, the return value is a pointer to a gdi+ bitmap
;
; notes Window must not be not minimised in order to get a handle to it's client area
Gdip_BitmapFromHWND(hwnd)
{
WinGetPos,,, Width, Height, ahk_id %hwnd%
hbm := CreateDIBSection(Width, Height), hdc := CreateCompatibleDC(), obm := SelectObject(hdc, hbm)
PrintWindow(hwnd, hdc)
pBitmap := Gdip_CreateBitmapFromHBITMAP(hbm)
SelectObject(hdc, obm), DeleteObject(hbm), DeleteDC(hdc)
return pBitmap
}
;#####################################################################################
; Function CreateRectF
; Description Creates a RectF object, containing a the coordinates and dimensions of a rectangle
;
; RectF Name to call the RectF object
; x x-coordinate of the upper left corner of the rectangle
; y y-coordinate of the upper left corner of the rectangle
; w Width of the rectangle
; h Height of the rectangle
;
; return No return value
CreateRectF(ByRef RectF, x, y, w, h)
{
VarSetCapacity(RectF, 16)
NumPut(x, RectF, 0, "float"), NumPut(y, RectF, 4, "float"), NumPut(w, RectF, 8, "float"), NumPut(h, RectF, 12, "float")
}
;#####################################################################################
; Function CreateRect
; Description Creates a Rect object, containing a the coordinates and dimensions of a rectangle
;
; RectF Name to call the RectF object
; x x-coordinate of the upper left corner of the rectangle
; y y-coordinate of the upper left corner of the rectangle
; w Width of the rectangle
; h Height of the rectangle
;
; return No return value
CreateRect(ByRef Rect, x, y, w, h)
{
VarSetCapacity(Rect, 16)
NumPut(x, Rect, 0, "uint"), NumPut(y, Rect, 4, "uint"), NumPut(w, Rect, 8, "uint"), NumPut(h, Rect, 12, "uint")
}
;#####################################################################################
; Function CreateSizeF
; Description Creates a SizeF object, containing an 2 values
;
; SizeF Name to call the SizeF object
; w w-value for the SizeF object
; h h-value for the SizeF object
;
; return No Return value
CreateSizeF(ByRef SizeF, w, h)
{
VarSetCapacity(SizeF, 8)
NumPut(w, SizeF, 0, "float"), NumPut(h, SizeF, 4, "float")
}
;#####################################################################################
; Function CreatePointF
; Description Creates a SizeF object, containing an 2 values
;
; SizeF Name to call the SizeF object
; w w-value for the SizeF object
; h h-value for the SizeF object
;
; return No Return value
CreatePointF(ByRef PointF, x, y)
{
VarSetCapacity(PointF, 8)
NumPut(x, PointF, 0, "float"), NumPut(y, PointF, 4, "float")
}
;#####################################################################################
; Function CreateDIBSection
; Description The CreateDIBSection function creates a DIB (Device Independent Bitmap) that applications can write to directly
;
; w width of the bitmap to create
; h height of the bitmap to create
; hdc a handle to the device context to use the palette from
; bpp bits per pixel (32 = ARGB)
; ppvBits A pointer to a variable that receives a pointer to the location of the DIB bit values
;
; return returns a DIB. A gdi bitmap
;
; notes ppvBits will receive the location of the pixels in the DIB
CreateDIBSection(w, h, hdc="", bpp=32, ByRef ppvBits=0)
{
hdc2 := hdc ? hdc : GetDC()
VarSetCapacity(bi, 40, 0)
NumPut(w, bi, 4), NumPut(h, bi, 8), NumPut(40, bi, 0), NumPut(1, bi, 12, "ushort"), NumPut(0, bi, 16), NumPut(bpp, bi, 14, "ushort")
hbm := DllCall("CreateDIBSection", "uint" , hdc2, "uint" , &bi, "uint" , 0, "uint*", ppvBits, "uint" , 0, "uint" , 0)
if !hdc
ReleaseDC(hdc2)
return hbm
}
;#####################################################################################
; Function PrintWindow
; Description The PrintWindow function copies a visual window into the specified device context (DC), typically a printer DC
;
; hwnd A handle to the window that will be copied
; hdc A handle to the device context
; Flags Drawing options
;
; return If the function succeeds, it returns a nonzero value
;
; PW_CLIENTONLY = 1
PrintWindow(hwnd, hdc, Flags=0)
{
return DllCall("PrintWindow", "uint", hwnd, "uint", hdc, "uint", Flags)
}
;#####################################################################################
; Function DestroyIcon
; Description Destroys an icon and frees any memory the icon occupied
;
; hIcon Handle to the icon to be destroyed. The icon must not be in use
;
; return If the function succeeds, the return value is nonzero
DestroyIcon(hIcon)
{
return DllCall("DestroyIcon", "uint", hIcon)
}
;#####################################################################################
PaintDesktop(hdc)
{
return DllCall("PaintDesktop", "uint", hdc)
}
;#####################################################################################
CreateCompatibleBitmap(hdc, w, h)
{
return DllCall("gdi32\CreateCompatibleBitmap", "uint", hdc, "int", w, "int", h)
}
;#####################################################################################
; Function CreateCompatibleDC
; Description This function creates a memory device context (DC) compatible with the specified device
;
; hdc Handle to an existing device context
;
; return returns the handle to a device context or 0 on failure
;
; notes If this handle is 0 (by default), the function creates a memory device context compatible with the application's current screen
CreateCompatibleDC(hdc=0)
{
return DllCall("CreateCompatibleDC", "uint", hdc)
}
;#####################################################################################
; Function SelectObject
; Description The SelectObject function selects an object into the specified device context (DC). The new object replaces the previous object of the same type
;
; hdc Handle to a DC
; hgdiobj A handle to the object to be selected into the DC
;
; return If the selected object is not a region and the function succeeds, the return value is a handle to the object being replaced
;
; notes The specified object must have been created by using one of the following functions
; Bitmap - CreateBitmap, CreateBitmapIndirect, CreateCompatibleBitmap, CreateDIBitmap, CreateDIBSection (A single bitmap cannot be selected into more than one DC at the same time)
; Brush - CreateBrushIndirect, CreateDIBPatternBrush, CreateDIBPatternBrushPt, CreateHatchBrush, CreatePatternBrush, CreateSolidBrush
; Font - CreateFont, CreateFontIndirect
; Pen - CreatePen, CreatePenIndirect
; Region - CombineRgn, CreateEllipticRgn, CreateEllipticRgnIndirect, CreatePolygonRgn, CreateRectRgn, CreateRectRgnIndirect
;
; notes If the selected object is a region and the function succeeds, the return value is one of the following value
;
; SIMPLEREGION = 2 Region consists of a single rectangle
; COMPLEXREGION = 3 Region consists of more than one rectangle
; NULLREGION = 1 Region is empty
SelectObject(hdc, hgdiobj)
{
return DllCall("SelectObject", "uint", hdc, "uint", hgdiobj)
}
;#####################################################################################
; Function DeleteObject
; Description This function deletes a logical pen, brush, font, bitmap, region, or palette, freeing all system resources associated with the object
; After the object is deleted, the specified handle is no longer valid
;
; hObject Handle to a logical pen, brush, font, bitmap, region, or palette to delete
;
; return Nonzero indicates success. Zero indicates that the specified handle is not valid or that the handle is currently selected into a device context
DeleteObject(hObject)
{
return DllCall("DeleteObject", "uint", hObject)
}
;#####################################################################################
; Function GetDC
; Description This function retrieves a handle to a display device context (DC) for the client area of the specified window.
; The display device context can be used in subsequent graphics display interface (GDI) functions to draw in the client area of the window.
;
; hwnd Handle to the window whose device context is to be retrieved. If this value is NULL, GetDC retrieves the device context for the entire screen
;
; return The handle the device context for the specified window's client area indicates success. NULL indicates failure
GetDC(hwnd=0)
{
return DllCall("GetDC", "uint", hwnd)
}
;#####################################################################################
; DCX_CACHE = 0x2
; DCX_CLIPCHILDREN = 0x8
; DCX_CLIPSIBLINGS = 0x10
; DCX_EXCLUDERGN = 0x40
; DCX_EXCLUDEUPDATE = 0x100
; DCX_INTERSECTRGN = 0x80
; DCX_INTERSECTUPDATE = 0x200
; DCX_LOCKWINDOWUPDATE = 0x400
; DCX_NORECOMPUTE = 0x100000
; DCX_NORESETATTRS = 0x4
; DCX_PARENTCLIP = 0x20
; DCX_VALIDATE = 0x200000
; DCX_WINDOW = 0x1
GetDCEx(hwnd, flags=0, hrgnClip=0)
{
return DllCall("GetDCEx", "uint", hwnd, "uint", hrgnClip, "int", flags)
}
;#####################################################################################
; Function ReleaseDC
; Description This function releases a device context (DC), freeing it for use by other applications. The effect of ReleaseDC depends on the type of device context
;
; hdc Handle to the device context to be released
; hwnd Handle to the window whose device context is to be released
;
; return 1 = released
; 0 = not released
;
; notes The application must call the ReleaseDC function for each call to the GetWindowDC function and for each call to the GetDC function that retrieves a common device context
; An application cannot use the ReleaseDC function to release a device context that was created by calling the CreateDC function; instead, it must use the DeleteDC function.
ReleaseDC(hdc, hwnd=0)
{
return DllCall("ReleaseDC", "uint", hwnd, "uint", hdc)
}
;#####################################################################################
; Function DeleteDC
; Description The DeleteDC function deletes the specified device context (DC)
;
; hdc A handle to the device context
;
; return If the function succeeds, the return value is nonzero
;
; notes An application must not delete a DC whose handle was obtained by calling the GetDC function. Instead, it must call the ReleaseDC function to free the DC
DeleteDC(hdc)
{
return DllCall("DeleteDC", "uint", hdc)
}
;#####################################################################################
; Function Gdip_LibraryVersion
; Description Get the current library version
;
; return the library version
;
; notes This is useful for non compiled programs to ensure that a person doesn't run an old version when testing your scripts
Gdip_LibraryVersion()
{
return 1.45
}
;#####################################################################################
; Function: Gdip_BitmapFromBRA
; Description: Gets a pointer to a gdi+ bitmap from a BRA file
;
; BRAFromMemIn The variable for a BRA file read to memory
; File The name of the file, or its number that you would like (This depends on alternate parameter)
; Alternate Changes whether the File parameter is the file name or its number
;
; return If the function succeeds, the return value is a pointer to a gdi+ bitmap
; -1 = The BRA variable is empty
; -2 = The BRA has an incorrect header
; -3 = The BRA has information missing
; -4 = Could not find file inside the BRA
Gdip_BitmapFromBRA(ByRef BRAFromMemIn, File, Alternate=0)
{
if !BRAFromMemIn
return -1
Loop, Parse, BRAFromMemIn, `n
{
if (A_Index = 1)
{
StringSplit, Header, A_LoopField, |
if (Header0 != 4 || Header2 != "BRA!")
return -2
}
else if (A_Index = 2)
{
StringSplit, Info, A_LoopField, |
if (Info0 != 3)
return -3
}
else
break
}
if !Alternate
StringReplace, File, File, \, \\, All
RegExMatch(BRAFromMemIn, "mi`n)^" (Alternate ? File "\|.+?\|(\d+)\|(\d+)" : "\d+\|" File "\|(\d+)\|(\d+)") "$", FileInfo)
if !FileInfo
return -4
hData := DllCall("GlobalAlloc", "uint", 2, "uint", FileInfo2)
pData := DllCall("GlobalLock", "uint", hData)
DllCall("RtlMoveMemory", "uint", pData, "uint", &BRAFromMemIn+Info2+FileInfo1, "uint", FileInfo2)
DllCall("GlobalUnlock", "uint", hData)
DllCall("ole32\CreateStreamOnHGlobal", "uint", hData, "int", 1, "uint*", pStream)
DllCall("gdiplus\GdipCreateBitmapFromStream", "uint", pStream, "uint*", pBitmap)
DllCall(NumGet(NumGet(1*pStream)+8), "uint", pStream)
return pBitmap
}
;#####################################################################################
; Function Gdip_DrawRectangle
; Description This function uses a pen to draw the outline of a rectangle into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x x-coordinate of the top left of the rectangle
; y y-coordinate of the top left of the rectangle
; w width of the rectanlge
; h height of the rectangle
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawRectangle(pGraphics, pPen, x, y, w, h)
{
return DllCall("gdiplus\GdipDrawRectangle", "uint", pGraphics, "uint", pPen, "float", x, "float", y, "float", w, "float", h)
}
;#####################################################################################
; Function Gdip_DrawRoundedRectangle
; Description This function uses a pen to draw the outline of a rounded rectangle into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x x-coordinate of the top left of the rounded rectangle
; y y-coordinate of the top left of the rounded rectangle
; w width of the rectanlge
; h height of the rectangle
; r radius of the rounded corners
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawRoundedRectangle(pGraphics, pPen, x, y, w, h, r)
{
Gdip_SetClipRect(pGraphics, x-r, y-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x+w-r, y-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x-r, y+h-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x+w-r, y+h-r, 2*r, 2*r, 4)
E := Gdip_DrawRectangle(pGraphics, pPen, x, y, w, h)
Gdip_ResetClip(pGraphics)
Gdip_SetClipRect(pGraphics, x-(2*r), y+r, w+(4*r), h-(2*r), 4)
Gdip_SetClipRect(pGraphics, x+r, y-(2*r), w-(2*r), h+(4*r), 4)
Gdip_DrawEllipse(pGraphics, pPen, x, y, 2*r, 2*r)
Gdip_DrawEllipse(pGraphics, pPen, x+w-(2*r), y, 2*r, 2*r)
Gdip_DrawEllipse(pGraphics, pPen, x, y+h-(2*r), 2*r, 2*r)
Gdip_DrawEllipse(pGraphics, pPen, x+w-(2*r), y+h-(2*r), 2*r, 2*r)
Gdip_ResetClip(pGraphics)
return E
}
;#####################################################################################
; Function Gdip_DrawEllipse
; Description This function uses a pen to draw the outline of an ellipse into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x x-coordinate of the top left of the rectangle the ellipse will be drawn into
; y y-coordinate of the top left of the rectangle the ellipse will be drawn into
; w width of the ellipse
; h height of the ellipse
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawEllipse(pGraphics, pPen, x, y, w, h)
{
return DllCall("gdiplus\GdipDrawEllipse", "uint", pGraphics, "uint", pPen, "float", x, "float", y, "float", w, "float", h)
}
;#####################################################################################
; Function Gdip_DrawBezier
; Description This function uses a pen to draw the outline of a bezier (a weighted curve) into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x1 x-coordinate of the start of the bezier
; y1 y-coordinate of the start of the bezier
; x2 x-coordinate of the first arc of the bezier
; y2 y-coordinate of the first arc of the bezier
; x3 x-coordinate of the second arc of the bezier
; y3 y-coordinate of the second arc of the bezier
; x4 x-coordinate of the end of the bezier
; y4 y-coordinate of the end of the bezier
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawBezier(pGraphics, pPen, x1, y1, x2, y2, x3, y3, x4, y4)
{
return DllCall("gdiplus\GdipDrawBezier", "uint", pgraphics, "uint", pPen
, "float", x1, "float", y1, "float", x2, "float", y2
, "float", x3, "float", y3, "float", x4, "float", y4)
}
;#####################################################################################
; Function Gdip_DrawArc
; Description This function uses a pen to draw the outline of an arc into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x x-coordinate of the start of the arc
; y y-coordinate of the start of the arc
; w width of the arc
; h height of the arc
; StartAngle specifies the angle between the x-axis and the starting point of the arc
; SweepAngle specifies the angle between the starting and ending points of the arc
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawArc(pGraphics, pPen, x, y, w, h, StartAngle, SweepAngle)
{
return DllCall("gdiplus\GdipDrawArc", "uint", pGraphics, "uint", pPen, "float", x
, "float", y, "float", w, "float", h, "float", StartAngle, "float", SweepAngle)
}
;#####################################################################################
; Function Gdip_DrawPie
; Description This function uses a pen to draw the outline of a pie into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x x-coordinate of the start of the pie
; y y-coordinate of the start of the pie
; w width of the pie
; h height of the pie
; StartAngle specifies the angle between the x-axis and the starting point of the pie
; SweepAngle specifies the angle between the starting and ending points of the pie
;
; return status enumeration. 0 = success
;
; notes as all coordinates are taken from the top left of each pixel, then the entire width/height should be specified as subtracting the pen width
Gdip_DrawPie(pGraphics, pPen, x, y, w, h, StartAngle, SweepAngle)
{
return DllCall("gdiplus\GdipDrawPie", "uint", pGraphics, "uint", pPen, "float", x, "float", y, "float", w, "float", h, "float", StartAngle, "float", SweepAngle)
}
;#####################################################################################
; Function Gdip_DrawLine
; Description This function uses a pen to draw a line into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; x1 x-coordinate of the start of the line
; y1 y-coordinate of the start of the line
; x2 x-coordinate of the end of the line
; y2 y-coordinate of the end of the line
;
; return status enumeration. 0 = success
Gdip_DrawLine(pGraphics, pPen, x1, y1, x2, y2)
{
return DllCall("gdiplus\GdipDrawLine", "uint", pGraphics, "uint", pPen
, "float", x1, "float", y1, "float", x2, "float", y2)
}
;#####################################################################################
; Function Gdip_DrawLines
; Description This function uses a pen to draw a series of joined lines into the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pPen Pointer to a pen
; Points the coordinates of all the points passed as x1,y1|x2,y2|x3,y3.....
;
; return status enumeration. 0 = success
Gdip_DrawLines(pGraphics, pPen, Points)
{
StringSplit, Points, Points, |
VarSetCapacity(PointF, 8*Points0)
Loop, %Points0%
{
StringSplit, Coord, Points%A_Index%, `,
NumPut(Coord1, PointF, 8*(A_Index-1), "float"), NumPut(Coord2, PointF, (8*(A_Index-1))+4, "float")
}
return DllCall("gdiplus\GdipDrawLines", "uint", pGraphics, "uint", pPen, "uint", &PointF, "int", Points0)
}
;#####################################################################################
; Function Gdip_FillRectangle
; Description This function uses a brush to fill a rectangle in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; x x-coordinate of the top left of the rectangle
; y y-coordinate of the top left of the rectangle
; w width of the rectanlge
; h height of the rectangle
;
; return status enumeration. 0 = success
Gdip_FillRectangle(pGraphics, pBrush, x, y, w, h)
{
return DllCall("gdiplus\GdipFillRectangle", "uint", pGraphics, "int", pBrush
, "float", x, "float", y, "float", w, "float", h)
}
;#####################################################################################
; Function Gdip_FillRoundedRectangle
; Description This function uses a brush to fill a rounded rectangle in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; x x-coordinate of the top left of the rounded rectangle
; y y-coordinate of the top left of the rounded rectangle
; w width of the rectanlge
; h height of the rectangle
; r radius of the rounded corners
;
; return status enumeration. 0 = success
Gdip_FillRoundedRectangle(pGraphics, pBrush, x, y, w, h, r)
{
Region := Gdip_GetClipRegion(pGraphics)
Gdip_SetClipRect(pGraphics, x-r, y-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x+w-r, y-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x-r, y+h-r, 2*r, 2*r, 4)
Gdip_SetClipRect(pGraphics, x+w-r, y+h-r, 2*r, 2*r, 4)
E := Gdip_FillRectangle(pGraphics, pBrush, x, y, w, h)
Gdip_SetClipRegion(pGraphics, Region, 0)
Gdip_SetClipRect(pGraphics, x-(2*r), y+r, w+(4*r), h-(2*r), 4)
Gdip_SetClipRect(pGraphics, x+r, y-(2*r), w-(2*r), h+(4*r), 4)
Gdip_FillEllipse(pGraphics, pBrush, x, y, 2*r, 2*r)
Gdip_FillEllipse(pGraphics, pBrush, x+w-(2*r), y, 2*r, 2*r)
Gdip_FillEllipse(pGraphics, pBrush, x, y+h-(2*r), 2*r, 2*r)
Gdip_FillEllipse(pGraphics, pBrush, x+w-(2*r), y+h-(2*r), 2*r, 2*r)
Gdip_SetClipRegion(pGraphics, Region, 0)
Gdip_DeleteRegion(Region)
return E
}
;#####################################################################################
; Function Gdip_FillPolygon
; Description This function uses a brush to fill a polygon in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; Points the coordinates of all the points passed as x1,y1|x2,y2|x3,y3.....
;
; return status enumeration. 0 = success
;
; notes Alternate will fill the polygon as a whole, wheras winding will fill each new "segment"
; Alternate = 0
; Winding = 1
Gdip_FillPolygon(pGraphics, pBrush, Points, FillMode=0)
{
StringSplit, Points, Points, |
VarSetCapacity(PointF, 8*Points0)
Loop, %Points0%
{
StringSplit, Coord, Points%A_Index%, `,
NumPut(Coord1, PointF, 8*(A_Index-1), "float"), NumPut(Coord2, PointF, (8*(A_Index-1))+4, "float")
}
return DllCall("gdiplus\GdipFillPolygon", "uint", pGraphics, "uint", pBrush, "uint", &PointF, "int", Points0, "int", FillMode)
}
;#####################################################################################
; Function Gdip_FillPie
; Description This function uses a brush to fill a pie in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; x x-coordinate of the top left of the pie
; y y-coordinate of the top left of the pie
; w width of the pie
; h height of the pie
; StartAngle specifies the angle between the x-axis and the starting point of the pie
; SweepAngle specifies the angle between the starting and ending points of the pie
;
; return status enumeration. 0 = success
Gdip_FillPie(pGraphics, pBrush, x, y, w, h, StartAngle, SweepAngle)
{
return DllCall("gdiplus\GdipFillPie", "uint", pGraphics, "uint", pBrush
, "float", x, "float", y, "float", w, "float", h, "float", StartAngle, "float", SweepAngle)
}
;#####################################################################################
; Function Gdip_FillEllipse
; Description This function uses a brush to fill an ellipse in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; x x-coordinate of the top left of the ellipse
; y y-coordinate of the top left of the ellipse
; w width of the ellipse
; h height of the ellipse
;
; return status enumeration. 0 = success
Gdip_FillEllipse(pGraphics, pBrush, x, y, w, h)
{
return DllCall("gdiplus\GdipFillEllipse", "uint", pGraphics, "uint", pBrush, "float", x, "float", y, "float", w, "float", h)
}
;#####################################################################################
; Function Gdip_FillRegion
; Description This function uses a brush to fill a region in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; Region Pointer to a Region
;
; return status enumeration. 0 = success
;
; notes You can create a region Gdip_CreateRegion() and then add to this
Gdip_FillRegion(pGraphics, pBrush, Region)
{
return DllCall("gdiplus\GdipFillRegion", "uint", pGraphics, "uint", pBrush, "uint", Region)
}
;#####################################################################################
; Function Gdip_FillPath
; Description This function uses a brush to fill a path in the Graphics of a bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBrush Pointer to a brush
; Region Pointer to a Path
;
; return status enumeration. 0 = success
Gdip_FillPath(pGraphics, pBrush, Path)
{
return DllCall("gdiplus\GdipFillPath", "uint", pGraphics, "uint", pBrush, "uint", Path)
}
;#####################################################################################
; Function Gdip_DrawImagePointsRect
; Description This function draws a bitmap into the Graphics of another bitmap and skews it
;
; pGraphics Pointer to the Graphics of a bitmap
; pBitmap Pointer to a bitmap to be drawn
; Points Points passed as x1,y1|x2,y2|x3,y3 (3 points: top left, top right, bottom left) describing the drawing of the bitmap
; sx x-coordinate of source upper-left corner
; sy y-coordinate of source upper-left corner
; sw width of source rectangle
; sh height of source rectangle
; Matrix a matrix used to alter image attributes when drawing
;
; return status enumeration. 0 = success
;
; notes if sx,sy,sw,sh are missed then the entire source bitmap will be used
; Matrix can be omitted to just draw with no alteration to ARGB
; Matrix may be passed as a digit from 0 - 1 to change just transparency
; Matrix can be passed as a matrix with any delimiter
Gdip_DrawImagePointsRect(pGraphics, pBitmap, Points, sx="", sy="", sw="", sh="", Matrix=1)
{
StringSplit, Points, Points, |
VarSetCapacity(PointF, 8*Points0)
Loop, %Points0%
{
StringSplit, Coord, Points%A_Index%, `,
NumPut(Coord1, PointF, 8*(A_Index-1), "float"), NumPut(Coord2, PointF, (8*(A_Index-1))+4, "float")
}
if (Matrix&1 = "")
ImageAttr := Gdip_SetImageAttributesColorMatrix(Matrix)
else if (Matrix != 1)
ImageAttr := Gdip_SetImageAttributesColorMatrix("1|0|0|0|0|0|1|0|0|0|0|0|1|0|0|0|0|0|" Matrix "|0|0|0|0|0|1")
if (sx = "" && sy = "" && sw = "" && sh = "")
{
sx := 0, sy := 0
sw := Gdip_GetImageWidth(pBitmap)
sh := Gdip_GetImageHeight(pBitmap)
}
E := DllCall("gdiplus\GdipDrawImagePointsRect", "uint", pGraphics, "uint", pBitmap
, "uint", &PointF, "int", Points0, "float", sx, "float", sy, "float", sw, "float", sh
, "int", 2, "uint", ImageAttr, "uint", 0, "uint", 0)
if ImageAttr
Gdip_DisposeImageAttributes(ImageAttr)
return E
}
;#####################################################################################
; Function Gdip_DrawImage
; Description This function draws a bitmap into the Graphics of another bitmap
;
; pGraphics Pointer to the Graphics of a bitmap
; pBitmap Pointer to a bitmap to be drawn
; dx x-coord of destination upper-left corner
; dy y-coord of destination upper-left corner
; dw width of destination image
; dh height of destination image
; sx x-coordinate of source upper-left corner
; sy y-coordinate of source upper-left corner
; sw width of source image
; sh height of source image
; Matrix a matrix used to alter image attributes when drawing
;
; return status enumeration. 0 = success
;
; notes if sx,sy,sw,sh are missed then the entire source bitmap will be used
; Gdip_DrawImage performs faster
; Matrix can be omitted to just draw with no alteration to ARGB
; Matrix may be passed as a digit from 0 - 1 to change just transparency
; Matrix can be passed as a matrix with any delimiter. For example:
; MatrixBright=
; (
; 1.5 |0 |0 |0 |0
; 0 |1.5 |0 |0 |0
; 0 |0 |1.5 |0 |0
; 0 |0 |0 |1 |0
; 0.05 |0.05 |0.05 |0 |1
; )
;
; notes MatrixBright = 1.5|0|0|0|0|0|1.5|0|0|0|0|0|1.5|0|0|0|0|0|1|0|0.05|0.05|0.05|0|1
; MatrixGreyScale = 0.299|0.299|0.299|0|0|0.587|0.587|0.587|0|0|0.114|0.114|0.114|0|0|0|0|0|1|0|0|0|0|0|1
; MatrixNegative = -1|0|0|0|0|0|-1|0|0|0|0|0|-1|0|0|0|0|0|1|0|0|0|0|0|1
Gdip_DrawImage(pGraphics, pBitmap, dx="", dy="", dw="", dh="", sx="", sy="", sw="", sh="", Matrix=1)
{
if (Matrix&1 = "")
ImageAttr := Gdip_SetImageAttributesColorMatrix(Matrix)
else if (Matrix != 1)
ImageAttr := Gdip_SetImageAttributesColorMatrix("1|0|0|0|0|0|1|0|0|0|0|0|1|0|0|0|0|0|" Matrix "|0|0|0|0|0|1")
if (sx = "" && sy = "" && sw = "" && sh = "")
{
if (dx = "" && dy = "" && dw = "" && dh = "")
{
sx := dx := 0, sy := dy := 0
sw := dw := Gdip_GetImageWidth(pBitmap)
sh := dh := Gdip_GetImageHeight(pBitmap)
}
else
{
sx := sy := 0
sw := Gdip_GetImageWidth(pBitmap)
sh := Gdip_GetImageHeight(pBitmap)
}
}
E := DllCall("gdiplus\GdipDrawImageRectRect", "uint", pGraphics, "uint", pBitmap
, "float", dx, "float", dy, "float", dw, "float", dh
, "float", sx, "float", sy, "float", sw, "float", sh
, "int", 2, "uint", ImageAttr, "uint", 0, "uint", 0)
if ImageAttr
Gdip_DisposeImageAttributes(ImageAttr)
return E
}
;#####################################################################################
; Function Gdip_SetImageAttributesColorMatrix
; Description This function creates an image matrix ready for drawing
;
; Matrix a matrix used to alter image attributes when drawing
; passed with any delimeter
;
; return returns an image matrix on sucess or 0 if it fails
;
; notes MatrixBright = 1.5|0|0|0|0|0|1.5|0|0|0|0|0|1.5|0|0|0|0|0|1|0|0.05|0.05|0.05|0|1
; MatrixGreyScale = 0.299|0.299|0.299|0|0|0.587|0.587|0.587|0|0|0.114|0.114|0.114|0|0|0|0|0|1|0|0|0|0|0|1
; MatrixNegative = -1|0|0|0|0|0|-1|0|0|0|0|0|-1|0|0|0|0|0|1|0|0|0|0|0|1
Gdip_SetImageAttributesColorMatrix(Matrix)
{
VarSetCapacity(ColourMatrix, 100, 0)
Matrix := RegExReplace(RegExReplace(Matrix, "^[^\d-\.]+([\d\.])", "$1", "", 1), "[^\d-\.]+", "|")
StringSplit, Matrix, Matrix, |
Loop, 25
{
Matrix := (Matrix%A_Index% != "") ? Matrix%A_Index% : Mod(A_Index-1, 6) ? 0 : 1
NumPut(Matrix, ColourMatrix, (A_Index-1)*4, "float")
}
DllCall("gdiplus\GdipCreateImageAttributes", "uint*", ImageAttr)
DllCall("gdiplus\GdipSetImageAttributesColorMatrix", "uint", ImageAttr, "int", 1, "int", 1, "uint", &ColourMatrix, "int", 0, "int", 0)
return ImageAttr
}
;#####################################################################################
; Function Gdip_GraphicsFromImage
; Description This function gets the graphics for a bitmap used for drawing functions
;
; pBitmap Pointer to a bitmap to get the pointer to its graphics
;
; return returns a pointer to the graphics of a bitmap
;
; notes a bitmap can be drawn into the graphics of another bitmap
Gdip_GraphicsFromImage(pBitmap)
{
DllCall("gdiplus\GdipGetImageGraphicsContext", "uint", pBitmap, "uint*", pGraphics)
return pGraphics
}
;#####################################################################################
; Function Gdip_GraphicsFromHDC
; Description This function gets the graphics from the handle to a device context
;
; hdc This is the handle to the device context
;
; return returns a pointer to the graphics of a bitmap
;
; notes You can draw a bitmap into the graphics of another bitmap
Gdip_GraphicsFromHDC(hdc)
{
DllCall("gdiplus\GdipCreateFromHDC", "uint", hdc, "uint*", pGraphics)
return pGraphics
}
;#####################################################################################
; Function Gdip_GetDC
; Description This function gets the device context of the passed Graphics
;
; hdc This is the handle to the device context
;
; return returns the device context for the graphics of a bitmap
Gdip_GetDC(pGraphics)
{
DllCall("gdiplus\GdipGetDC", "uint", pGraphics, "uint*", hdc)
return hdc
}
;#####################################################################################
; Function Gdip_ReleaseDC
; Description This function releases a device context from use for further use
;
; pGraphics Pointer to the graphics of a bitmap
; hdc This is the handle to the device context
;
; return status enumeration. 0 = success
Gdip_ReleaseDC(pGraphics, hdc)
{
return DllCall("gdiplus\GdipReleaseDC", "uint", pGraphics, "uint", hdc)
}
;#####################################################################################
; Function Gdip_GraphicsClear
; Description Clears the graphics of a bitmap ready for further drawing
;
; pGraphics Pointer to the graphics of a bitmap
; ARGB The colour to clear the graphics to
;
; return status enumeration. 0 = success
;
; notes By default this will make the background invisible
; Using clipping regions you can clear a particular area on the graphics rather than clearing the entire graphics
Gdip_GraphicsClear(pGraphics, ARGB=0x00ffffff)
{
return DllCall("gdiplus\GdipGraphicsClear", "uint", pGraphics, "int", ARGB)
}
;#####################################################################################
; Function Gdip_BlurBitmap
; Description Gives a pointer to a blurred bitmap from a pointer to a bitmap
;
; pBitmap Pointer to a bitmap to be blurred
; Blur The Amount to blur a bitmap by from 1 (least blur) to 100 (most blur)
;
; return If the function succeeds, the return value is a pointer to the new blurred bitmap
; -1 = The blur parameter is outside the range 1-100
;
; notes This function will not dispose of the original bitmap
Gdip_BlurBitmap(pBitmap, Blur)
{
if (Blur > 100) || (Blur < 1)
return -1
sWidth := Gdip_GetImageWidth(pBitmap), sHeight := Gdip_GetImageHeight(pBitmap)
dWidth := sWidth//Blur, dHeight := sHeight//Blur
pBitmap1 := Gdip_CreateBitmap(dWidth, dHeight)
G1 := Gdip_GraphicsFromImage(pBitmap1)
Gdip_SetInterpolationMode(G1, 7)
Gdip_DrawImage(G1, pBitmap, 0, 0, dWidth, dHeight, 0, 0, sWidth, sHeight)
Gdip_DeleteGraphics(G1)
pBitmap2 := Gdip_CreateBitmap(sWidth, sHeight)
G2 := Gdip_GraphicsFromImage(pBitmap2)
Gdip_SetInterpolationMode(G2, 7)
Gdip_DrawImage(G2, pBitmap1, 0, 0, sWidth, sHeight, 0, 0, dWidth, dHeight)
Gdip_DeleteGraphics(G2)
Gdip_DisposeImage(pBitmap1)
return pBitmap2
}
;#####################################################################################
; Function: Gdip_SaveBitmapToFile
; Description: Saves a bitmap to a file in any supported format onto disk
;
; pBitmap Pointer to a bitmap
; sOutput The name of the file that the bitmap will be saved to. Supported extensions are: .BMP,.DIB,.RLE,.JPG,.JPEG,.JPE,.JFIF,.GIF,.TIF,.TIFF,.PNG
; Quality If saving as jpg (.JPG,.JPEG,.JPE,.JFIF) then quality can be 1-100 with default at maximum quality
;
; return If the function succeeds, the return value is zero, otherwise:
; -1 = Extension supplied is not a supported file format
; -2 = Could not get a list of encoders on system
; -3 = Could not find matching encoder for specified file format
; -4 = Could not get WideChar name of output file
; -5 = Could not save file to disk
;
; notes This function will use the extension supplied from the sOutput parameter to determine the output format
Gdip_SaveBitmapToFile(pBitmap, sOutput, Quality=75)
{
SplitPath, sOutput,,, Extension
if Extension not in BMP,DIB,RLE,JPG,JPEG,JPE,JFIF,GIF,TIF,TIFF,PNG
return -1
Extension := "." Extension
DllCall("gdiplus\GdipGetImageEncodersSize", "uint*", nCount, "uint*", nSize)
VarSetCapacity(ci, nSize)
DllCall("gdiplus\GdipGetImageEncoders", "uint", nCount, "uint", nSize, "uint", &ci)
if !(nCount && nSize)
return -2
Loop, %nCount%
{
Location := NumGet(ci, 76*(A_Index-1)+44)
if !A_IsUnicode
{
nSize := DllCall("WideCharToMultiByte", "uint", 0, "uint", 0, "uint", Location, "int", -1, "uint", 0, "int", 0, "uint", 0, "uint", 0)
VarSetCapacity(sString, nSize)
DllCall("WideCharToMultiByte", "uint", 0, "uint", 0, "uint", Location, "int", -1, "str", sString, "int", nSize, "uint", 0, "uint", 0)
if !InStr(sString, "*" Extension)
continue
}
else
{
nSize := DllCall("WideCharToMultiByte", "uint", 0, "uint", 0, "uint", Location, "int", -1, "uint", 0, "int", 0, "uint", 0, "uint", 0)
sString := ""
Loop, %nSize%
sString .= Chr(NumGet(Location+0, 2*(A_Index-1), "char"))
if !InStr(sString, "*" Extension)
continue
}
pCodec := &ci+76*(A_Index-1)
break
}
if !pCodec
return -3
if (Quality != 75)
{
Quality := (Quality < 0) ? 0 : (Quality > 100) ? 100 : Quality
if Extension in .JPG,.JPEG,.JPE,.JFIF
{
DllCall("gdiplus\GdipGetEncoderParameterListSize", "uint", pBitmap, "uint", pCodec, "uint*", nSize)
VarSetCapacity(EncoderParameters, nSize, 0)
DllCall("gdiplus\GdipGetEncoderParameterList", "uint", pBitmap, "uint", pCodec, "uint", nSize, "uint", &EncoderParameters)
Loop, % NumGet(EncoderParameters) ;%
{
if (NumGet(EncoderParameters, (28*(A_Index-1))+20) = 1) && (NumGet(EncoderParameters, (28*(A_Index-1))+24) = 6)
{
p := (28*(A_Index-1))+&EncoderParameters
NumPut(Quality, NumGet(NumPut(4, NumPut(1, p+0)+20)))
break
}
}
}
}
if !A_IsUnicode
{
nSize := DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, "uint", &sOutput, "int", -1, "uint", 0, "int", 0)
VarSetCapacity(wOutput, nSize*2)
DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, "uint", &sOutput, "int", -1, "uint", &wOutput, "int", nSize)
VarSetCapacity(wOutput, -1)
if !VarSetCapacity(wOutput)
return -4
E := DllCall("gdiplus\GdipSaveImageToFile", "uint", pBitmap, "uint", &wOutput, "uint", pCodec, "uint", p ? p : 0)
}
else
E := DllCall("gdiplus\GdipSaveImageToFile", "uint", pBitmap, "uint", &sOutput, "uint", pCodec, "uint", p ? p : 0)
return E ? -5 : 0
}
;#####################################################################################
; Function Gdip_GetPixel
; Description Gets the ARGB of a pixel in a bitmap
;
; pBitmap Pointer to a bitmap
; x x-coordinate of the pixel
; y y-coordinate of the pixel
;
; return Returns the ARGB value of the pixel
Gdip_GetPixel(pBitmap, x, y)
{
DllCall("gdiplus\GdipBitmapGetPixel", "uint", pBitmap, "int", x, "int", y, "uint*", ARGB)
return ARGB
}
;#####################################################################################
; Function Gdip_SetPixel
; Description Sets the ARGB of a pixel in a bitmap
;
; pBitmap Pointer to a bitmap
; x x-coordinate of the pixel
; y y-coordinate of the pixel
;
; return status enumeration. 0 = success
Gdip_SetPixel(pBitmap, x, y, ARGB)
{
return DllCall("gdiplus\GdipBitmapSetPixel", "uint", pBitmap, "int", x, "int", y, "int", ARGB)
}
;#####################################################################################
; Function Gdip_GetImageWidth
; Description Gives the width of a bitmap
;
; pBitmap Pointer to a bitmap
;
; return Returns the width in pixels of the supplied bitmap
Gdip_GetImageWidth(pBitmap)
{
DllCall("gdiplus\GdipGetImageWidth", "uint", pBitmap, "uint*", Width)
return Width
}
;#####################################################################################
; Function Gdip_GetImageHeight
; Description Gives the height of a bitmap
;
; pBitmap Pointer to a bitmap
;
; return Returns the height in pixels of the supplied bitmap
Gdip_GetImageHeight(pBitmap)
{
DllCall("gdiplus\GdipGetImageHeight", "uint", pBitmap, "uint*", Height)
return Height
}
;#####################################################################################
; Function Gdip_GetDimensions
; Description Gives the width and height of a bitmap
;
; pBitmap Pointer to a bitmap
; Width ByRef variable. This variable will be set to the width of the bitmap
; Height ByRef variable. This variable will be set to the height of the bitmap
;
; return No return value
; Gdip_GetDimensions(pBitmap, ThisWidth, ThisHeight) will set ThisWidth to the width and ThisHeight to the height
Gdip_GetImageDimensions(pBitmap, ByRef Width, ByRef Height)
{
DllCall("gdiplus\GdipGetImageWidth", "uint", pBitmap, "uint*", Width)
DllCall("gdiplus\GdipGetImageHeight", "uint", pBitmap, "uint*", Height)
}
;#####################################################################################
Gdip_GetDimensions(pBitmap, ByRef Width, ByRef Height)
{
Gdip_GetImageDimensions(pBitmap, Width, Height)
}
;#####################################################################################
Gdip_GetImagePixelFormat(pBitmap)
{
DllCall("gdiplus\GdipGetImagePixelFormat", "uint", pBitmap, "uint*", Format)
return Format
}
;#####################################################################################
; Function Gdip_GetDpiX
; Description Gives the horizontal dots per inch of the graphics of a bitmap
;
; pBitmap Pointer to a bitmap
; Width ByRef variable. This variable will be set to the width of the bitmap
; Height ByRef variable. This variable will be set to the height of the bitmap
;
; return No return value
; Gdip_GetDimensions(pBitmap, ThisWidth, ThisHeight) will set ThisWidth to the width and ThisHeight to the height
Gdip_GetDpiX(pGraphics)
{
DllCall("gdiplus\GdipGetDpiX", "uint", pGraphics, "float*", dpix)
return Round(dpix)
}
;#####################################################################################
Gdip_GetDpiY(pGraphics)
{
DllCall("gdiplus\GdipGetDpiY", "uint", pGraphics, "float*", dpiy)
return Round(dpiy)
}
;#####################################################################################
Gdip_GetImageHorizontalResolution(pBitmap)
{
DllCall("gdiplus\GdipGetImageHorizontalResolution", "uint", pBitmap, "float*", dpix)
return Round(dpix)
}
;#####################################################################################
Gdip_GetImageVerticalResolution(pBitmap)
{
DllCall("gdiplus\GdipGetImageVerticalResolution", "uint", pBitmap, "float*", dpiy)
return Round(dpiy)
}
;#####################################################################################
Gdip_BitmapSetResolution(pBitmap, dpix, dpiy)
{
return DllCall("gdiplus\GdipBitmapSetResolution", "uint", pBitmap, "float", dpix, "float", dpiy)
}
;#####################################################################################
Gdip_CreateBitmapFromFile(sFile, IconNumber=1, IconSize="")
{
SplitPath, sFile,,, ext
if ext in exe,dll
{
Sizes := IconSize ? IconSize : 256 "|" 128 "|" 64 "|" 48 "|" 32 "|" 16
VarSetCapacity(buf, 40)
Loop, Parse, Sizes, |
{
DllCall("PrivateExtractIcons", "str", sFile, "int", IconNumber-1, "int", A_LoopField, "int", A_LoopField, "uint*", hIcon, "uint*", 0, "uint", 1, "uint", 0)
if !hIcon
continue
if !DllCall("GetIconInfo", "uint", hIcon, "uint", &buf)
{
DestroyIcon(hIcon)
continue
}
hbmColor := NumGet(buf, 16)
hbmMask := NumGet(buf, 12)
if !(hbmColor && DllCall("GetObject", "uint", hbmColor, "int", 24, "uint", &buf))
{
DestroyIcon(hIcon)
continue
}
break
}
if !hIcon
return -1
Width := NumGet(buf, 4, "int"), Height := NumGet(buf, 8, "int")
hbm := CreateDIBSection(Width, -Height), hdc := CreateCompatibleDC(), obm := SelectObject(hdc, hbm)
if !DllCall("DrawIconEx", "uint", hdc, "int", 0, "int", 0, "uint", hIcon, "uint", Width, "uint", Height, "uint", 0, "uint", 0, "uint", 3)
{
DestroyIcon(hIcon)
return -2
}
VarSetCapacity(dib, 84)
DllCall("GetObject", "uint", hbm, "int", 84, "uint", &dib)
Stride := NumGet(dib, 12), Bits := NumGet(dib, 20)
DllCall("gdiplus\GdipCreateBitmapFromScan0", "int", Width, "int", Height, "int", Stride, "int", 0x26200A, "uint", Bits, "uint*", pBitmapOld)
pBitmap := Gdip_CreateBitmap(Width, Height), G := Gdip_GraphicsFromImage(pBitmap)
Gdip_DrawImage(G, pBitmapOld, 0, 0, Width, Height, 0, 0, Width, Height)
SelectObject(hdc, obm), DeleteObject(hbm), DeleteDC(hdc)
Gdip_DeleteGraphics(G), Gdip_DisposeImage(pBitmapOld)
DestroyIcon(hIcon)
}
else
{
if !A_IsUnicode
{
VarSetCapacity(wFile, 1023)
DllCall("kernel32\MultiByteToWideChar", "uint", 0, "uint", 0, "uint", &sFile, "int", -1, "uint", &wFile, "int", 512)
DllCall("gdiplus\GdipCreateBitmapFromFile", "uint", &wFile, "uint*", pBitmap)
}
else
DllCall("gdiplus\GdipCreateBitmapFromFile", "uint", &sFile, "uint*", pBitmap)
}
return pBitmap
}
;#####################################################################################
Gdip_CreateBitmapFromHBITMAP(hBitmap, Palette=0)
{
DllCall("gdiplus\GdipCreateBitmapFromHBITMAP", "uint", hBitmap, "uint", Palette, "uint*", pBitmap)
return pBitmap
}
;#####################################################################################
Gdip_CreateHBITMAPFromBitmap(pBitmap, Background=0xffffffff)
{
DllCall("gdiplus\GdipCreateHBITMAPFromBitmap", "uint", pBitmap, "uint*", hbm, "int", Background)
return hbm
}
;#####################################################################################
Gdip_CreateBitmapFromHICON(hIcon)
{
DllCall("gdiplus\GdipCreateBitmapFromHICON", "uint", hIcon, "uint*", pBitmap)
return pBitmap
}
;#####################################################################################
Gdip_CreateHICONFromBitmap(pBitmap)
{
DllCall("gdiplus\GdipCreateHICONFromBitmap", "uint", pBitmap, "uint*", hIcon)
return hIcon
}
;#####################################################################################
Gdip_CreateBitmap(Width, Height, Format=0x26200A)
{
DllCall("gdiplus\GdipCreateBitmapFromScan0", "int", Width, "int", Height, "int", 0, "int", Format, "uint", 0, "uint*", pBitmap)
Return pBitmap
}
;#####################################################################################
Gdip_CreateBitmapFromClipboard()
{
if !DllCall("OpenClipboard", "uint", 0)
return -1
if !DllCall("IsClipboardFormatAvailable", "uint", 8)
return -2
if !hBitmap := DllCall("GetClipboardData", "uint", 2)
return -3
if !pBitmap := Gdip_CreateBitmapFromHBITMAP(hBitmap)
return -4
if !DllCall("CloseClipboard")
return -5
DeleteObject(hBitmap)
return pBitmap
}
;#####################################################################################
Gdip_SetBitmapToClipboard(pBitmap)
{
hBitmap := Gdip_CreateHBITMAPFromBitmap(pBitmap)
DllCall("GetObject", "uint", hBitmap, "int", VarSetCapacity(oi, 84, 0), "uint", &oi)
hdib := DllCall("GlobalAlloc", "uint", 2, "uint", 40+NumGet(oi, 44))
pdib := DllCall("GlobalLock", "uint", hdib)
DllCall("RtlMoveMemory", "uint", pdib, "uint", &oi+24, "uint", 40)
DllCall("RtlMoveMemory", "Uint", pdib+40, "Uint", NumGet(oi, 20), "uint", NumGet(oi, 44))
DllCall("GlobalUnlock", "uint", hdib)
DllCall("DeleteObject", "uint", hBitmap)
DllCall("OpenClipboard", "uint", 0)
DllCall("EmptyClipboard")
DllCall("SetClipboardData", "uint", 8, "uint", hdib)
DllCall("CloseClipboard")
}
;#####################################################################################
Gdip_CloneBitmapArea(pBitmap, x, y, w, h, Format=0x26200A)
{
DllCall("gdiplus\GdipCloneBitmapArea", "float", x, "float", y, "float", w, "float", h
, "int", Format, "uint", pBitmap, "uint*", pBitmapDest)
return pBitmapDest
}
;#####################################################################################
; Create resources
;#####################################################################################
Gdip_CreatePen(ARGB, w)
{
DllCall("gdiplus\GdipCreatePen1", "int", ARGB, "float", w, "int", 2, "uint*", pPen)
return pPen
}
;#####################################################################################
Gdip_CreatePenFromBrush(pBrush, w)
{
DllCall("gdiplus\GdipCreatePen2", "uint", pBrush, "float", w, "int", 2, "uint*", pPen)
return pPen
}
;#####################################################################################
Gdip_BrushCreateSolid(ARGB=0xff000000)
{
DllCall("gdiplus\GdipCreateSolidFill", "int", ARGB, "uint*", pBrush)
return pBrush
}
;#####################################################################################
; HatchStyleHorizontal = 0
; HatchStyleVertical = 1
; HatchStyleForwardDiagonal = 2
; HatchStyleBackwardDiagonal = 3
; HatchStyleCross = 4
; HatchStyleDiagonalCross = 5
; HatchStyle05Percent = 6
; HatchStyle10Percent = 7
; HatchStyle20Percent = 8
; HatchStyle25Percent = 9
; HatchStyle30Percent = 10
; HatchStyle40Percent = 11
; HatchStyle50Percent = 12
; HatchStyle60Percent = 13
; HatchStyle70Percent = 14
; HatchStyle75Percent = 15
; HatchStyle80Percent = 16
; HatchStyle90Percent = 17
; HatchStyleLightDownwardDiagonal = 18
; HatchStyleLightUpwardDiagonal = 19
; HatchStyleDarkDownwardDiagonal = 20
; HatchStyleDarkUpwardDiagonal = 21
; HatchStyleWideDownwardDiagonal = 22
; HatchStyleWideUpwardDiagonal = 23
; HatchStyleLightVertical = 24
; HatchStyleLightHorizontal = 25
; HatchStyleNarrowVertical = 26
; HatchStyleNarrowHorizontal = 27
; HatchStyleDarkVertical = 28
; HatchStyleDarkHorizontal = 29
; HatchStyleDashedDownwardDiagonal = 30
; HatchStyleDashedUpwardDiagonal = 31
; HatchStyleDashedHorizontal = 32
; HatchStyleDashedVertical = 33
; HatchStyleSmallConfetti = 34
; HatchStyleLargeConfetti = 35
; HatchStyleZigZag = 36
; HatchStyleWave = 37
; HatchStyleDiagonalBrick = 38
; HatchStyleHorizontalBrick = 39
; HatchStyleWeave = 40
; HatchStylePlaid = 41
; HatchStyleDivot = 42
; HatchStyleDottedGrid = 43
; HatchStyleDottedDiamond = 44
; HatchStyleShingle = 45
; HatchStyleTrellis = 46
; HatchStyleSphere = 47
; HatchStyleSmallGrid = 48
; HatchStyleSmallCheckerBoard = 49
; HatchStyleLargeCheckerBoard = 50
; HatchStyleOutlinedDiamond = 51
; HatchStyleSolidDiamond = 52
; HatchStyleTotal = 53
Gdip_BrushCreateHatch(ARGBfront, ARGBback, HatchStyle=0)
{
DllCall("gdiplus\GdipCreateHatchBrush", "int", HatchStyle, "int", ARGBfront, "int", ARGBback, "uint*", pBrush)
return pBrush
}
;#####################################################################################
Gdip_CreateTextureBrush(pBitmap, WrapMode=1, x=0, y=0, w="", h="")
{
if !(w && h)
DllCall("gdiplus\GdipCreateTexture", "uint", pBitmap, "int", WrapMode, "uint*", pBrush)
else
DllCall("gdiplus\GdipCreateTexture2", "uint", pBitmap, "int", WrapMode, "float", x, "float", y, "float", w, "float", h, "uint*", pBrush)
return pBrush
}
;#####################################################################################
; WrapModeTile = 0
; WrapModeTileFlipX = 1
; WrapModeTileFlipY = 2
; WrapModeTileFlipXY = 3
; WrapModeClamp = 4
Gdip_CreateLineBrush(x1, y1, x2, y2, ARGB1, ARGB2, WrapMode=1)
{
CreatePointF(PointF1, x1, y1), CreatePointF(PointF2, x2, y2)
DllCall("gdiplus\GdipCreateLineBrush", "uint", &PointF1, "uint", &PointF2, "int", ARGB1, "int", ARGB2, "int", WrapMode, "uint*", LGpBrush)
return LGpBrush
}
;#####################################################################################
; LinearGradientModeHorizontal = 0
; LinearGradientModeVertical = 1
; LinearGradientModeForwardDiagonal = 2
; LinearGradientModeBackwardDiagonal = 3
Gdip_CreateLineBrushFromRect(x, y, w, h, ARGB1, ARGB2, LinearGradientMode=1, WrapMode=1)
{
CreateRectF(RectF, x, y, w, h)
DllCall("gdiplus\GdipCreateLineBrushFromRect", "uint", &RectF, "int", ARGB1, "int", ARGB2, "int", LinearGradientMode, "int", WrapMode, "uint*", LGpBrush)
return LGpBrush
}
;#####################################################################################
Gdip_CloneBrush(pBrush)
{
DllCall("gdiplus\GdipCloneBrush", "uint", pBrush, "uint*", pBrushClone)
return pBrushClone
}
;#####################################################################################
; Delete resources
;#####################################################################################
Gdip_DeletePen(pPen)
{
return DllCall("gdiplus\GdipDeletePen", "uint", pPen)
}
;#####################################################################################
Gdip_DeleteBrush(pBrush)
{
return DllCall("gdiplus\GdipDeleteBrush", "uint", pBrush)
}
;#####################################################################################
Gdip_DisposeImage(pBitmap)
{
return DllCall("gdiplus\GdipDisposeImage", "uint", pBitmap)
}
;#####################################################################################
Gdip_DeleteGraphics(pGraphics)
{
return DllCall("gdiplus\GdipDeleteGraphics", "uint", pGraphics)
}
;#####################################################################################
Gdip_DisposeImageAttributes(ImageAttr)
{
return DllCall("gdiplus\GdipDisposeImageAttributes", "uint", ImageAttr)
}
;#####################################################################################
Gdip_DeleteFont(hFont)
{
return DllCall("gdiplus\GdipDeleteFont", "uint", hFont)
}
;#####################################################################################
Gdip_DeleteStringFormat(hFormat)
{
return DllCall("gdiplus\GdipDeleteStringFormat", "uint", hFormat)
}
;#####################################################################################
Gdip_DeleteFontFamily(hFamily)
{
return DllCall("gdiplus\GdipDeleteFontFamily", "uint", hFamily)
}
;#####################################################################################
Gdip_DeleteMatrix(Matrix)
{
return DllCall("gdiplus\GdipDeleteMatrix", "uint", Matrix)
}
;#####################################################################################
; Text functions
;#####################################################################################
Gdip_TextToGraphics(pGraphics, Text, Options, Font="Arial", Width="", Height="", Measure=0)
{
IWidth := Width, IHeight:= Height
RegExMatch(Options, "i)X([\-\d\.]+)(p*)", xpos)
RegExMatch(Options, "i)Y([\-\d\.]+)(p*)", ypos)
RegExMatch(Options, "i)W([\-\d\.]+)(p*)", Width)
RegExMatch(Options, "i)H([\-\d\.]+)(p*)", Height)
RegExMatch(Options, "i)C(?!(entre|enter))([a-f\d]+)", Colour)
RegExMatch(Options, "i)Top|Up|Bottom|Down|vCentre|vCenter", vPos)
RegExMatch(Options, "i)NoWrap", NoWrap)
RegExMatch(Options, "i)R(\d)", Rendering)
RegExMatch(Options, "i)S(\d+)(p*)", Size)
if !Gdip_DeleteBrush(Gdip_CloneBrush(Colour2))
PassBrush := 1, pBrush := Colour2
if !(IWidth && IHeight) && (xpos2 || ypos2 || Width2 || Height2 || Size2)
return -1
Style := 0, Styles := "Regular|Bold|Italic|BoldItalic|Underline|Strikeout"
Loop, Parse, Styles, |
{
if RegExMatch(Options, "\b" A_loopField)
Style |= (A_LoopField != "StrikeOut") ? (A_Index-1) : 8
}
Align := 0, Alignments := "Near|Left|Centre|Center|Far|Right"
Loop, Parse, Alignments, |
{
if RegExMatch(Options, "\b" A_loopField)
Align |= A_Index//2.1 ; 0|0|1|1|2|2
}
xpos := (xpos1 != "") ? xpos2 ? IWidth*(xpos1/100) : xpos1 : 0
ypos := (ypos1 != "") ? ypos2 ? IHeight*(ypos1/100) : ypos1 : 0
Width := Width1 ? Width2 ? IWidth*(Width1/100) : Width1 : IWidth
Height := Height1 ? Height2 ? IHeight*(Height1/100) : Height1 : IHeight
if !PassBrush
Colour := "0x" (Colour2 ? Colour2 : "ff000000")
Rendering := ((Rendering1 >= 0) && (Rendering1 <= 5)) ? Rendering1 : 4
Size := (Size1 > 0) ? Size2 ? IHeight*(Size1/100) : Size1 : 12
hFamily := Gdip_FontFamilyCreate(Font)
hFont := Gdip_FontCreate(hFamily, Size, Style)
FormatStyle := NoWrap ? 0x4000 | 0x1000 : 0x4000
hFormat := Gdip_StringFormatCreate(FormatStyle)
pBrush := PassBrush ? pBrush : Gdip_BrushCreateSolid(Colour)
if !(hFamily && hFont && hFormat && pBrush && pGraphics)
return !pGraphics ? -2 : !hFamily ? -3 : !hFont ? -4 : !hFormat ? -5 : !pBrush ? -6 : 0
CreateRectF(RC, xpos, ypos, Width, Height)
Gdip_SetStringFormatAlign(hFormat, Align)
Gdip_SetTextRenderingHint(pGraphics, Rendering)
ReturnRC := Gdip_MeasureString(pGraphics, Text, hFont, hFormat, RC)
if vPos
{
StringSplit, ReturnRC, ReturnRC, |
if (vPos = "vCentre") || (vPos = "vCenter")
ypos += (Height-ReturnRC4)//2
else if (vPos = "Top") || (vPos = "Up")
ypos := 0
else if (vPos = "Bottom") || (vPos = "Down")
ypos := Height-ReturnRC4
CreateRectF(RC, xpos, ypos, Width, ReturnRC4)
ReturnRC := Gdip_MeasureString(pGraphics, Text, hFont, hFormat, RC)
}
if !Measure
E := Gdip_DrawString(pGraphics, Text, hFont, hFormat, pBrush, RC)
if !PassBrush
Gdip_DeleteBrush(pBrush)
Gdip_DeleteStringFormat(hFormat)
Gdip_DeleteFont(hFont)
Gdip_DeleteFontFamily(hFamily)
return E ? E : ReturnRC
}
;#####################################################################################
Gdip_DrawString(pGraphics, sString, hFont, hFormat, pBrush, ByRef RectF)
{
if !A_IsUnicode
{
nSize := DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, "uint", &sString, "int", -1, "uint", 0, "int", 0)
VarSetCapacity(wString, nSize*2)
DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, "uint", &sString, "int", -1, "uint", &wString, "int", nSize)
return DllCall("gdiplus\GdipDrawString", "uint", pGraphics
, "uint", &wString, "int", -1, "uint", hFont, "uint", &RectF, "uint", hFormat, "uint", pBrush)
}
else
{
return DllCall("gdiplus\GdipDrawString", "uint", pGraphics
, "uint", &sString, "int", -1, "uint", hFont, "uint", &RectF, "uint", hFormat, "uint", pBrush)
}
}
;#####################################################################################
Gdip_MeasureString(pGraphics, sString, hFont, hFormat, ByRef RectF)
{
VarSetCapacity(RC, 16)
if !A_IsUnicode
{
nSize := DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, "uint", &sString, "int", -1, "uint", 0, "int", 0)
VarSetCapacity(wString, nSize*2)
DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, "uint", &sString, "int", -1, "uint", &wString, "int", nSize)
DllCall("gdiplus\GdipMeasureString", "uint", pGraphics
, "uint", &wString, "int", -1, "uint", hFont, "uint", &RectF, "uint", hFormat, "uint", &RC, "uint*", Chars, "uint*", Lines)
}
else
{
DllCall("gdiplus\GdipMeasureString", "uint", pGraphics
, "uint", &sString, "int", -1, "uint", hFont, "uint", &RectF, "uint", hFormat, "uint", &RC, "uint*", Chars, "uint*", Lines)
}
return &RC ? NumGet(RC, 0, "float") "|" NumGet(RC, 4, "float") "|" NumGet(RC, 8, "float") "|" NumGet(RC, 12, "float") "|" Chars "|" Lines : 0
}
; Near = 0
; Center = 1
; Far = 2
Gdip_SetStringFormatAlign(hFormat, Align)
{
return DllCall("gdiplus\GdipSetStringFormatAlign", "uint", hFormat, "int", Align)
}
; StringFormatFlagsDirectionRightToLeft = 0x00000001
; StringFormatFlagsDirectionVertical = 0x00000002
; StringFormatFlagsNoFitBlackBox = 0x00000004
; StringFormatFlagsDisplayFormatControl = 0x00000020
; StringFormatFlagsNoFontFallback = 0x00000400
; StringFormatFlagsMeasureTrailingSpaces = 0x00000800
; StringFormatFlagsNoWrap = 0x00001000
; StringFormatFlagsLineLimit = 0x00002000
; StringFormatFlagsNoClip = 0x00004000
Gdip_StringFormatCreate(Format=0, Lang=0)
{
DllCall("gdiplus\GdipCreateStringFormat", "int", Format, "int", Lang, "uint*", hFormat)
return hFormat
}
; Regular = 0
; Bold = 1
; Italic = 2
; BoldItalic = 3
; Underline = 4
; Strikeout = 8
Gdip_FontCreate(hFamily, Size, Style=0)
{
DllCall("gdiplus\GdipCreateFont", "uint", hFamily, "float", Size, "int", Style, "int", 0, "uint*", hFont)
return hFont
}
Gdip_FontFamilyCreate(Font)
{
if !A_IsUnicode
{
nSize := DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, "uint", &Font, "int", -1, "uint", 0, "int", 0)
VarSetCapacity(wFont, nSize*2)
DllCall("MultiByteToWideChar", "uint", 0, "uint", 0, "uint", &Font, "int", -1, "uint", &wFont, "int", nSize)
DllCall("gdiplus\GdipCreateFontFamilyFromName", "uint", &wFont, "uint", 0, "uint*", hFamily)
}
else
DllCall("gdiplus\GdipCreateFontFamilyFromName", "uint", &Font, "uint", 0, "uint*", hFamily)
return hFamily
}
;#####################################################################################
; Matrix functions
;#####################################################################################
Gdip_CreateAffineMatrix(m11, m12, m21, m22, x, y)
{
DllCall("gdiplus\GdipCreateMatrix2", "float", m11, "float", m12, "float", m21, "float", m22, "float", x, "float", y, "uint*", Matrix)
return Matrix
}
Gdip_CreateMatrix()
{
DllCall("gdiplus\GdipCreateMatrix", "uint*", Matrix)
return Matrix
}
;#####################################################################################
; GraphicsPath functions
;#####################################################################################
; Alternate = 0
; Winding = 1
Gdip_CreatePath(BrushMode=0)
{
DllCall("gdiplus\GdipCreatePath", "int", BrushMode, "uint*", Path)
return Path
}
Gdip_AddPathEllipse(Path, x, y, w, h)
{
return DllCall("gdiplus\GdipAddPathEllipse", "uint", Path, "float", x, "float", y, "float", w, "float", h)
}
Gdip_AddPathPolygon(Path, Points)
{
StringSplit, Points, Points, |
VarSetCapacity(PointF, 8*Points0)
Loop, %Points0%
{
StringSplit, Coord, Points%A_Index%, `,
NumPut(Coord1, PointF, 8*(A_Index-1), "float"), NumPut(Coord2, PointF, (8*(A_Index-1))+4, "float")
}
return DllCall("gdiplus\GdipAddPathPolygon", "uint", Path, "uint", &PointF, "int", Points0)
}
Gdip_DeletePath(Path)
{
return DllCall("gdiplus\GdipDeletePath", "uint", Path)
}
;#####################################################################################
; Quality functions
;#####################################################################################
; SystemDefault = 0
; SingleBitPerPixelGridFit = 1
; SingleBitPerPixel = 2
; AntiAliasGridFit = 3
; AntiAlias = 4
Gdip_SetTextRenderingHint(pGraphics, RenderingHint)
{
return DllCall("gdiplus\GdipSetTextRenderingHint", "uint", pGraphics, "int", RenderingHint)
}
; Default = 0
; LowQuality = 1
; HighQuality = 2
; Bilinear = 3
; Bicubic = 4
; NearestNeighbor = 5
; HighQualityBilinear = 6
; HighQualityBicubic = 7
Gdip_SetInterpolationMode(pGraphics, InterpolationMode)
{
return DllCall("gdiplus\GdipSetInterpolationMode", "uint", pGraphics, "int", InterpolationMode)
}
; Default = 0
; HighSpeed = 1
; HighQuality = 2
; None = 3
; AntiAlias = 4
Gdip_SetSmoothingMode(pGraphics, SmoothingMode)
{
return DllCall("gdiplus\GdipSetSmoothingMode", "uint", pGraphics, "int", SmoothingMode)
}
; CompositingModeSourceOver = 0 (blended)
; CompositingModeSourceCopy = 1 (overwrite)
Gdip_SetCompositingMode(pGraphics, CompositingMode=0)
{
return DllCall("gdiplus\GdipSetCompositingMode", "uint", pGraphics, "int", CompositingMode)
}
;#####################################################################################
; Extra functions
;#####################################################################################
Gdip_Startup()
{
if !DllCall("GetModuleHandle", "str", "gdiplus")
DllCall("LoadLibrary", "str", "gdiplus")
VarSetCapacity(si, 16, 0), si := Chr(1)
DllCall("gdiplus\GdiplusStartup", "uint*", pToken, "uint", &si, "uint", 0)
return pToken
}
Gdip_Shutdown(pToken)
{
DllCall("gdiplus\GdiplusShutdown", "uint", pToken)
if hModule := DllCall("GetModuleHandle", "str", "gdiplus")
DllCall("FreeLibrary", "uint", hModule)
return 0
}
; Prepend = 0; The new operation is applied before the old operation.
; Append = 1; The new operation is applied after the old operation.
Gdip_RotateWorldTransform(pGraphics, Angle, MatrixOrder=0)
{
return DllCall("gdiplus\GdipRotateWorldTransform", "uint", pGraphics, "float", Angle, "int", MatrixOrder)
}
Gdip_ScaleWorldTransform(pGraphics, x, y, MatrixOrder=0)
{
return DllCall("gdiplus\GdipScaleWorldTransform", "uint", pGraphics, "float", x, "float", y, "int", MatrixOrder)
}
Gdip_TranslateWorldTransform(pGraphics, x, y, MatrixOrder=0)
{
return DllCall("gdiplus\GdipTranslateWorldTransform", "uint", pGraphics, "float", x, "float", y, "int", MatrixOrder)
}
Gdip_ResetWorldTransform(pGraphics)
{
return DllCall("gdiplus\GdipResetWorldTransform", "uint", pGraphics)
}
Gdip_GetRotatedTranslation(Width, Height, Angle, ByRef xTranslation, ByRef yTranslation)
{
pi := 3.14159, TAngle := Angle*(pi/180)
Bound := (Angle >= 0) ? Mod(Angle, 360) : 360-Mod(-Angle, -360)
if ((Bound >= 0) && (Bound <= 90))
xTranslation := Height*Sin(TAngle), yTranslation := 0
else if ((Bound > 90) && (Bound <= 180))
xTranslation := (Height*Sin(TAngle))-(Width*Cos(TAngle)), yTranslation := -Height*Cos(TAngle)
else if ((Bound > 180) && (Bound <= 270))
xTranslation := -(Width*Cos(TAngle)), yTranslation := -(Height*Cos(TAngle))-(Width*Sin(TAngle))
else if ((Bound > 270) && (Bound <= 360))
xTranslation := 0, yTranslation := -Width*Sin(TAngle)
}
Gdip_GetRotatedDimensions(Width, Height, Angle, ByRef RWidth, ByRef RHeight)
{
pi := 3.14159, TAngle := Angle*(pi/180)
if !(Width && Height)
return -1
RWidth := Ceil(Abs(Width*Cos(TAngle))+Abs(Height*Sin(TAngle)))
RHeight := Ceil(Abs(Width*Sin(TAngle))+Abs(Height*Cos(Tangle)))
}
; RotateNoneFlipNone = 0
; Rotate90FlipNone = 1
; Rotate180FlipNone = 2
; Rotate270FlipNone = 3
; RotateNoneFlipX = 4
; Rotate90FlipX = 5
; Rotate180FlipX = 6
; Rotate270FlipX = 7
; RotateNoneFlipY = Rotate180FlipX
; Rotate90FlipY = Rotate270FlipX
; Rotate180FlipY = RotateNoneFlipX
; Rotate270FlipY = Rotate90FlipX
; RotateNoneFlipXY = Rotate180FlipNone
; Rotate90FlipXY = Rotate270FlipNone
; Rotate180FlipXY = RotateNoneFlipNone
; Rotate270FlipXY = Rotate90FlipNone
Gdip_ImageRotateFlip(pBitmap, RotateFlipType=1)
{
return DllCall("gdiplus\GdipImageRotateFlip", "uint", pBitmap, "int", RotateFlipType)
}
; Replace = 0
; Intersect = 1
; Union = 2
; Xor = 3
; Exclude = 4
; Complement = 5
Gdip_SetClipRect(pGraphics, x, y, w, h, CombineMode=0)
{
return DllCall("gdiplus\GdipSetClipRect", "uint", pGraphics, "float", x, "float", y, "float", w, "float", h, "int", CombineMode)
}
Gdip_SetClipPath(pGraphics, Path, CombineMode=0)
{
return DllCall("gdiplus\GdipSetClipPath", "uint", pGraphics, "uint", Path, "int", CombineMode)
}
Gdip_ResetClip(pGraphics)
{
return DllCall("gdiplus\GdipResetClip", "uint", pGraphics)
}
Gdip_GetClipRegion(pGraphics)
{
Region := Gdip_CreateRegion()
DllCall("gdiplus\GdipGetClip", "uint" pGraphics, "uint*", Region)
return Region
}
Gdip_SetClipRegion(pGraphics, Region, CombineMode=0)
{
return DllCall("gdiplus\GdipSetClipRegion", "uint", pGraphics, "uint", Region, "int", CombineMode)
}
Gdip_CreateRegion()
{
DllCall("gdiplus\GdipCreateRegion", "uint*", Region)
return Region
}
Gdip_DeleteRegion(Region)
{
return DllCall("gdiplus\GdipDeleteRegion", "uint", Region)
}
;#####################################################################################
; BitmapLockBits
;#####################################################################################
Gdip_LockBits(pBitmap, x, y, w, h, ByRef Stride, ByRef Scan0, ByRef BitmapData, LockMode = 3, PixelFormat = 0x26200a)
{
CreateRect(Rect, x, y, w, h)
VarSetCapacity(BitmapData, 21, 0)
E := DllCall("Gdiplus\GdipBitmapLockBits", "uint", pBitmap, "uint", &Rect, "uint", LockMode, "int", PixelFormat, "uint", &BitmapData)
Stride := NumGet(BitmapData, 8)
Scan0 := NumGet(BitmapData, 16)
return E
}
;#####################################################################################
Gdip_UnlockBits(pBitmap, ByRef BitmapData)
{
return DllCall("Gdiplus\GdipBitmapUnlockBits", "uint", pBitmap, "uint", &BitmapData)
}
;#####################################################################################
Gdip_SetLockBitPixel(ARGB, Scan0, x, y, Stride)
{
Numput(ARGB, Scan0+0, (x*4)+(y*Stride))
}
;#####################################################################################
Gdip_GetLockBitPixel(Scan0, x, y, Stride)
{
return NumGet(Scan0+0, (x*4)+(y*Stride))
}
;#####################################################################################
Gdip_PixelateBitmap(pBitmap, ByRef pBitmapOut, BlockSize)
{
static PixelateBitmap
if !PixelateBitmap
{
MCode_PixelateBitmap := "83EC388B4424485355568B74245C99F7FE8B5C244C8B6C2448578BF88BCA894C241C897C243485FF0F8E2E0300008B44245"
. "499F7FE897C24448944242833C089542418894424308944242CEB038D490033FF397C2428897C24380F8E750100008BCE0FAFCE894C24408DA4240000"
. "000033C03BF08944241089442460894424580F8E8A0000008B5C242C8D4D028BD52BD183C203895424208D3CBB0FAFFE8BD52BD142895424248BD52BD"
. "103F9897C24148974243C8BCF8BFE8DA424000000008B5C24200FB61C0B03C30FB619015C24588B5C24240FB61C0B015C24600FB61C11015C241083C1"
. "0483EF0175D38B7C2414037C245C836C243C01897C241475B58B7C24388B6C244C8B5C24508B4C244099F7F9894424148B44245899F7F9894424588B4"
. "4246099F7F9894424608B44241099F7F98944241085F60F8E820000008D4B028BC32BC18D68038B44242C8D04B80FAFC68BD32BD142895424248BD32B"
. "D103C18944243C89742420EB038D49008BC88BFE0FB64424148B5C24248804290FB644245888010FB644246088040B0FB644241088040A83C10483EF0"
. "175D58B44243C0344245C836C2420018944243C75BE8B4C24408B5C24508B6C244C8B7C2438473B7C2428897C24380F8C9FFEFFFF8B4C241C33D23954"
. "24180F846401000033C03BF2895424108954246089542458895424148944243C0F8E82000000EB0233D2395424187E6F8B4C243003C80FAF4C245C8B4"
. "424280FAFC68D550203CA8D0C818BC52BC283C003894424208BC52BC2408BFD2BFA8B54241889442424895424408B4424200FB614080FB60101542414"
. "8B542424014424580FB6040A0FB61439014424600154241083C104836C24400175CF8B44243C403BC68944243C7C808B4C24188B4424140FAFCE99F7F"
. "9894424148B44245899F7F9894424588B44246099F7F9894424608B44241099F7F98944241033C08944243C85F60F8E7F000000837C2418007E6F8B4C"
. "243003C80FAF4C245C8B4424280FAFC68D530203CA8D0C818BC32BC283C003894424208BC32BC2408BFB2BFA8B54241889442424895424400FB644241"
. "48B5424208804110FB64424580FB654246088018B4424248814010FB654241088143983C104836C24400175CF8B44243C403BC68944243C7C818B4C24"
. "1C8B44245C0144242C01742430836C2444010F85F4FCFFFF8B44245499F7FE895424188944242885C00F8E890100008BF90FAFFE33D2897C243C89542"
. "45489442438EB0233D233C03BCA89542410895424608954245889542414894424400F8E840000003BF27E738B4C24340FAFCE03C80FAF4C245C034C24"
. "548D55028BC52BC283C003894424208BC52BC2408BFD03CA894424242BFA89742444908B5424200FB6040A0FB611014424148B442424015424580FB61"
. "4080FB6040F015424600144241083C104836C24440175CF8B4424408B7C243C8B4C241C33D2403BC1894424400F8C7CFFFFFF8B44241499F7FF894424"
. "148B44245899F7FF894424588B44246099F7FF894424608B44241099F7FF8944241033C08944244085C90F8E8000000085F67E738B4C24340FAFCE03C"
. "80FAF4C245C034C24548D53028BC32BC283C003894424208BC32BC2408BFB03CA894424242BFA897424448D49000FB65424148B4424208814010FB654"
. "24580FB644246088118B5424248804110FB644241088043983C104836C24440175CF8B4424408B7C243C8B4C241C403BC1894424407C808D04B500000"
. "00001442454836C2438010F858CFEFFFF33D233C03BCA89542410895424608954245889542414894424440F8E9A000000EB048BFF33D2395424180F8E"
. "7D0000008B4C24340FAFCE03C80FAF4C245C8B4424280FAFC68D550203CA8D0C818BC52BC283C003894424208BC52BC240894424248BC52BC28B54241"
. "8895424548DA424000000008B5424200FB6140A015424140FB611015424588B5424240FB6140A015424600FB614010154241083C104836C24540175CF"
. "8B4424448B4C241C403BC1894424440F8C6AFFFFFF0FAF4C24188B44241499F7F9894424148B44245899F7F9894424588B44246099F7F9894424608B4"
. "4241099F7F98944241033C03944241C894424540F8E7B0000008B7C241885FF7E688B4C24340FAFCE03C80FAF4C245C8B4424280FAFC68D530203CA8D"
. "0C818BC32BC283C003894424208BC32BC2408BEB894424242BEA0FB65424148B4424208814010FB65424580FB644246088118B5424248804110FB6442"
. "41088042983C10483EF0175D18B442454403B44241C894424547C855F5E5D33C05B83C438C3"
VarSetCapacity(PixelateBitmap, StrLen(MCode_PixelateBitmap)//2)
Loop % StrLen(MCode_PixelateBitmap)//2 ;%
NumPut("0x" SubStr(MCode_PixelateBitmap, (2*A_Index)-1, 2), PixelateBitmap, A_Index-1, "char")
}
Gdip_GetImageDimensions(pBitmap, Width, Height)
if (Width != Gdip_GetImageWidth(pBitmapOut) || Height != Gdip_GetImageHeight(pBitmapOut))
return -1
if (BlockSize > Width || BlockSize > Height)
return -2
E1 := Gdip_LockBits(pBitmap, 0, 0, Width, Height, Stride1, Scan01, BitmapData1)
E2 := Gdip_LockBits(pBitmapOut, 0, 0, Width, Height, Stride2, Scan02, BitmapData2)
if (E1 || E2)
return -3
E := DllCall(&PixelateBitmap, "uint", Scan01, "uint", Scan02, "int", Width, "int", Height, "int", Stride1, "int", BlockSize)
Gdip_UnlockBits(pBitmap, BitmapData1), Gdip_UnlockBits(pBitmapOut, BitmapData2)
return 0
}
;#####################################################################################
Gdip_ToARGB(A, R, G, B)
{
return (A << 24) | (R << 16) | (G << 8) | B
}
;#####################################################################################
Gdip_FromARGB(ARGB, ByRef A, ByRef R, ByRef G, ByRef B)
{
A := (0xff000000 & ARGB) >> 24
R := (0x00ff0000 & ARGB) >> 16
G := (0x0000ff00 & ARGB) >> 8
B := 0x000000ff & ARGB
}
;#####################################################################################
Gdip_AFromARGB(ARGB)
{
return (0xff000000 & ARGB) >> 24
}
;#####################################################################################
Gdip_RFromARGB(ARGB)
{
return (0x00ff0000 & ARGB) >> 16
}
;#####################################################################################
Gdip_GFromARGB(ARGB)
{
return (0x0000ff00 & ARGB) >> 8
}
;#####################################################################################
Gdip_BFromARGB(ARGB)
{
return 0x000000ff & ARGB
}
;_____________________________________________________________
;End of Program
; \ /
; Made By /\(^_^)/\
; Bugz000 .--( | )--.
; _/\ | /\_
; `v`
;terrible ASCII art but i dont think you look pretty either okay?
;Credits to tic for GDIP
;Credits to tidbit for being tidbit
;Credits to Talisman for being there when times got tough during the creation of this program, we did it bro
;we cried for hours but we did it in the end...
After:
with an intuitive but quick UI that displays how many files it's moved, the KB of the file it's moving, and the total KB it's moved, crossfade effects and overwrite protection; it will NEVER overwrite or dump your files into a directory that doesn't exist so your files are as safe as i can make them
simply drop this file into a folder (don't put it on desktop else it will move itself wahaha)
change DIR at the top of the code to a directory you wish your files to go into, and click away, enjoy your instantly clear desktop
![[-shack--img-]](https://cqdx.uk/shack.png){kind=link}