Pulover's Macro Creator v5.4.1 - The Complete Automation Tool
Moderator: Pulover
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
I'm trying to send the keyboard command windows+left so that I can snap my windows to the left and right sides of my screen. The other key combination that I have tried have worked fine, but the windows key doesn't want to show up when inputting keyboard commands.
Re: awsome tool!
Try this.mikeyta wrote:PMC is too powerful! Is it possible for regular old folk to use this without much know how?
I can make a loop and put in delay and such but once I get into keeping 6 buff up for my mmo I found it rather impossible without much understanding of PMC
Is there a way I can use it to hit F1 every 30 seconds and F2 every 5 min, and F3 every 8 seconds. And so on for F3-F6 with all different cool down.
Thanks for looking into this
I play mmo and wanted to use it to keep up my buff . But the pixil tutorial lost me
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
LucidSoul wrote:I'm trying to send the keyboard command windows+left so that I can snap my windows to the left and right sides of my screen. The other key combination that I have tried have worked fine, but the windows key doesn't want to show up when inputting keyboard commands.
Re: awsome tool!
hasantr wrote:Try this.mikeyta wrote:PMC is too powerful! Is it possible for regular old folk to use this without much know how?
I can make a loop and put in delay and such but once I get into keeping 6 buff up for my mmo I found it rather impossible without much understanding of PMC
Is there a way I can use it to hit F1 every 30 seconds and F2 every 5 min, and F3 every 8 seconds. And so on for F3-F6 with all different cool down.
Thanks for looking into this
I play mmo and wanted to use it to keep up my buff . But the pixil tutorial lost me
TimerKey.zip
Hi Hasantr,
I am loving it!!! oh my goodness I am never going to die again!
May I request one more? but this time it is for 10 different things . I got 4 buff and 6 spells with different cool down.
I want it to help me press 0,1,2,3,4,5,6,7,8,9.
can you give them all a cool down of 10 sec and I can modify them individually. I am too excited to figure how you wrote this but I know how to edit time. and make it loop.
I appreciate your time and have a great weekend.
Re: awsome tool!
Hi mikeyta!mikeyta wrote:hasantr wrote:Try this.mikeyta wrote:PMC is too powerful! Is it possible for regular old folk to use this without much know how?
I can make a loop and put in delay and such but once I get into keeping 6 buff up for my mmo I found it rather impossible without much understanding of PMC
Is there a way I can use it to hit F1 every 30 seconds and F2 every 5 min, and F3 every 8 seconds. And so on for F3-F6 with all different cool down.
Thanks for looking into this
I play mmo and wanted to use it to keep up my buff . But the pixil tutorial lost me
TimerKey.zip
Hi Hasantr,
I am loving it!!! oh my goodness I am never going to die again!
May I request one more? but this time it is for 10 different things . I got 4 buff and 6 spells with different cool down.
I want it to help me press 0,1,2,3,4,5,6,7,8,9.
can you give them all a cool down of 10 sec and I can modify them individually. I am too excited to figure how you wrote this but I know how to edit time. and make it loop.
I appreciate your time and have a great weekend.
I know very little English. Thank you, please thank the MacroCreator developer.
If I understood what you wanted:
If you want to improve yourself: https://www.youtube.com/channel/uc6w4jg ... pyq/videos
Re: awsome tool!
Thanks Mr Pulover.hasantr wrote:Hi mikeyta!mikeyta wrote:hasantr wrote:Try this.mikeyta wrote:PMC is too powerful! Is it possible for regular old folk to use this without much know how?
I can make a loop and put in delay and such but once I get into keeping 6 buff up for my mmo I found it rather impossible without much understanding of PMC
Is there a way I can use it to hit F1 every 30 seconds and F2 every 5 min, and F3 every 8 seconds. And so on for F3-F6 with all different cool down.
Thanks for looking into this
I play mmo and wanted to use it to keep up my buff . But the pixil tutorial lost me
TimerKey.zip
Hi Hasantr,
I am loving it!!! oh my goodness I am never going to die again!
May I request one more? but this time it is for 10 different things . I got 4 buff and 6 spells with different cool down.
I want it to help me press 0,1,2,3,4,5,6,7,8,9.
can you give them all a cool down of 10 sec and I can modify them individually. I am too excited to figure how you wrote this but I know how to edit time. and make it loop.
I appreciate your time and have a great weekend.
I know very little English. Thank you, please thank the MacroCreator developer.
If I understood what you wanted: 10Key.zip
If you want to improve yourself: https://www.youtube.com/channel/uc6w4jg ... pyq/videos
Your program is powerful and I hope to be able to use more of its function some day with help from others such as Hasantr
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
Hello, I am trying to use the macro creator to count the number of photos in a folder, is there anyway to do that? Thank you!
-Coda
-Coda
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
Adapt your work. It counts the jpg files in the folder you specify.Coda0415 wrote:Hello, I am trying to use the macro creator to count the number of photos in a folder, is there anyway to do that? Thank you!
-Coda
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
Thank you very much, however I seem to be struggling to adapt it to work. I tried changing the *.jpg* to *.CR2* for the file type, but it cannot find any of the photos. Is there something I may be doing wrong?
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
Coda0415 wrote:Thank you very much, however I seem to be struggling to adapt it to work. I tried changing the *.jpg* to *.CR2* for the file type, but it cannot find any of the photos. Is there something I may be doing wrong?
I had a comma in the name of my folder, that is what was throwing it out of whack. thank you again! But another question, can I save the number in as a variable to compare to another folder at another time?
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
Maybe the address of your photo folder is wrong.Coda0415 wrote:Thank you very much, however I seem to be struggling to adapt it to work. I tried changing the *.jpg* to *.CR2* for the file type, but it cannot find any of the photos. Is there something I may be doing wrong?
It works this way.
V:\DCIM\100CANON\*.cr2*
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
Sleep time came here.I will answer tomorrow.Guest wrote:Coda0415 wrote:Thank you very much, however I seem to be struggling to adapt it to work. I tried changing the *.jpg* to *.CR2* for the file type, but it cannot find any of the photos. Is there something I may be doing wrong?
I had a comma in the name of my folder, that is what was throwing it out of whack. thank you again! But another question, can I save the number in as a variable to compare to another folder at another time?
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
Maybe you can shape this work according to your needs.Guest wrote:Coda0415 wrote:Thank you very much, however I seem to be struggling to adapt it to work. I tried changing the *.jpg* to *.CR2* for the file type, but it cannot find any of the photos. Is there something I may be doing wrong?
I had a comma in the name of my folder, that is what was throwing it out of whack. thank you again! But another question, can I save the number in as a variable to compare to another folder at another time?
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
Practically it can't record a single controlclick! Don't know why, but it's a fact. Code looks fine.
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
Actually, I do not quite understand what the problem is. Maybe this can help.CAH9t wrote:Practically it can't record a single controlclick! Don't know why, but it's a fact. Code looks fine.
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
I know, I know. I don't understand it myself - shoulda worked. And of course it's of no help, I tried all sorts of combinations of those options and winXP/win7 .hasantr wrote: Actually, I do not quite understand what the problem is. Maybe this can help.
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
CAH9t wrote:I know, I know. I don't understand it myself - shoulda worked. And of course it's of no help, I tried all sorts of combinations of those options and winXP/win7 .hasantr wrote: Actually, I do not quite understand what the problem is. Maybe this can help.
Sorry, there is no solution to this. Because the controls do not work everywhere. You have to save mouse clicks.
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
the Pulover Macro Creator website is dead. can anyone help?
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
You can still download it from github. https://github.com/Pulover/PuloversMacr ... /releases/
Cheers
Cheers
Windows 10 x64 Professional, Intel i5-8500, NVIDIA GTX 1060 6GB, 2x16GB Kingston FURY Beast - DDR4 3200 MHz | [About Me] | [About the AHK Foundation] | [Courses on AutoHotkey]
[ASPDM - StdLib Distribution] | [Qonsole - Quake-like console emulator] | [LibCon - Autohotkey Console Library]
Re: Pulover's Macro Creator v5.0.5 - The Complete Automation Tool
When will the new version be released? Do you have any information? I like this program very much.joedf wrote:You can still download it from github. https://github.com/Pulover/PuloversMacr ... /releases/
Cheers
Return to “Pulovers Macro Creator”
Who is online
Users browsing this forum: Jobber and 19 guests